Unique Top-selling HPE6-A72 Exams – New 2023 HP Pratice Exam [Q21-Q43]

4/5 - (1 vote)

Unique Top-selling HPE6-A72 Exams – New 2023 HP Pratice Exam

Aruba Certified Switching Associate (ACSA) V1 Dumps HPE6-A72 Exam for Full Questions – Exam Study Guide

HP HPE6-A72 (Aruba Certified Switching Associate) certification exam is designed to test the skills and knowledge of IT professionals in the area of network switching. Aruba Certified Switching Associate Exam certification is offered by Hewlett Packard Enterprise (HPE), a leading provider of IT infrastructure and networking solutions. The HPE6-A72 exam is part of the Aruba Certified Switching Associate (ACSA) certification track, which is a well-respected credential in the industry.

HP HPE6-A72, also known as the Aruba Certified Switching Associate (ACSA) exam, is designed for individuals who want to validate their knowledge and skills in implementing and configuring ArubaOS-Switches. Aruba Certified Switching Associate Exam certification is intended for network administrators, technicians, and engineers who are responsible for managing small to medium-sized networks in enterprise and campus environments. The HPE6-A72 exam is a vendor-neutral certification that is recognized globally and is a valuable asset to any IT professional’s career.

Q21. Which statement is true regarding modern switching requirements?

Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today’s power-over-Ethernet needs.

Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.

While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.

Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.

Q22. What is the correct description of a Multi-Layer Switch?

a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

any switch that supports PoE, LLDP-MED and Flow Control

has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

Q23. Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.

Q24. Place the OSI Layers in the correct order. Arrange them from least to greatest, starting with Layer 1 on the top, and progressing to Layer 7 on the bottom.

1 – physical Layer
2 – Data Link Layer
3 – Network Layer
4 – Transport Layer
5 – Session Layer
6 – Presentation Layer
7 – Application Layer

Q25. What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?

backup secondary sftp://[email protected]/GL.10.04.0003.swi

copy secondary sftp://[email protected]/GL.10.04.0003.swi

copy sftp://[email protected]/GL.10.04.0003.swi secondary

copy secondary tftp://[email protected]/GL.10.04.0003.swi

Q26. Refer to the exhibit.

The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?

The command page

The command terminal length 30

The command more

The command less

Q27. Refer to the exhibit.

The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?

The command page

The command terminal length 30

The command more

The command less

Q28. Refer to the exhibit.

Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?

11010101

10110001

01001011

11111000

Q29. Match the terms to the correct layer of the OSI model.

Q30. What are two available options as part of a DHCP offer message? (Choose two.)

SSID

DNS server IP

Subnet Mask

LLDP-MED

VLANID

Q31. Refer to the exhibit

What is true regarding VLAN 50 according to the diagram above?

VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.

Since VLAN 50 has not been assigned to any enabled physical port, the status is down.

VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.

VLAN 50 was never added to the vlan-database and therefore is in a down state.

Q32. Which two options are the Layer 2 protocols? (Choose two.)

802.1Q

IPSec

STP

RIP

802.11af

Q33. The following command is issued:
Switch# checkpoint rollback start
What is the result?

The command will fail because rollback commands must be issued from global-config mode.

The switch will revert the running-configuration to the checkpoint called ‘start1 without a reboot.

The command will fail because it is incomplete.

The switch will use the checkpoint ‘rollback1 as the starting configuration on next reboot.

Q34. ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?

No password is set for this account.

“password”

“forgetme!”

The same login password that has lost originally.

Explanation/Reference: https://www.arubanetworks.com/techdocs/ArubaOS_83_Web_Help/Content/ArubaFrameStyles/ Management_Utilities/enab_radsec_reset_admin_enabl_pwd.htm

Q35. Refer to the exhibit.

All four switches in the diagram have been configured with the region name “Aruba1”.
What two other MSTP configurations must match for switches within the same MST region? (Choose two.)

MST region type

MST Bridge ID

MST version number

MST revision number

MST VLAN to instance mapping

Q36. Refer to the exhibit.

What commands will successfully enable the SVI for vlan 100 on interface 1/1/1 to produce the results displayed in the command show ip interface brief in the exhibit below?

Access-1(config)# interface 1/1/1
Access-1(config-if)# routing
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24

Access-1(config)# interface 1/1/1
Access-1(config-if)# vlan trunk permit vlan 100
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address static 10.1.1.1/24

Access-1(config)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24

Access-1(config-if)# vlan 100
Access-1(config-vlan)# ip address 10.1.1.1/24

Q37. Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.

Q38. Match each description to the correct term.

Q39. What is the Link Layer Discovery Protocol?

a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system

a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4

a standardized protocol for communicating directly-connected device information and capabilities.

an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP

Q40. Which command can be used to find the serial number of an Aruba OS-CX switch?

The command inventory

The command version

The command show running-configuration

The command show system

Explanation/Reference:

Q41. What are two features of the three-tier designs? (Choose two.)

removes the distribution layer in favor of a spine-leaf design used in modern data center deployments

adds a distribution layer to free up resources from the Core for improved performance and routing throughput

a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments

uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer

is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided

Q42. ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?

No password is set for this account.

“password”

“forgetme!”

The same login password that has lost originally.

Q43. Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?