Updated Jul 29, 2024 HPE2-K45 Exam Dumps – PDF Questions and Testing Engine [Q12-Q31]

Rate this post

Updated Jul 29, 2024 HPE2-K45 Exam Dumps – PDF Questions and Testing Engine

New (2024) HP HPE2-K45 Exam Dumps

HP HPE2-K45 certification exam is designed for IT professionals who are looking to validate their knowledge and skills in using HPE SimpliVity solutions. HPE SimpliVity is a hyperconverged infrastructure solution that combines storage, compute, and networking in a single appliance. With this certification, professionals can demonstrate their expertise in implementing and managing HPE SimpliVity solutions to improve the efficiency and performance of their organization’s IT infrastructure.

NEW QUESTION 12
A customer is planning to deploy VDI infrastructure on HPE SimpuVity platform. They are considering
implementing stretched cluster. Which statement regarding the design of a stretched cluster is true?

Stretched clusters need additional licenses for VDI workloads,

Stretched clusters support up to 96 HPE SimpliVity hosts.

An Arbiter should be placed in a primary site and replicated to the secondary site.

Both Linked clones and Full clones are supported on a stretched cluster.

NEW QUESTION 13
When should an svtcli account be used?

to access HPE SimpliVity data using REST API

when two or more VCs are not available

when hypervisor-based user is unavailable

for a daily management tasks performed using CLI

NEW QUESTION 14
You try to delete an existing datastore, but the operation fails. What is a likely cause of the failure?

The datastore is marked as read-only.

The FC connection between the host and array has failed.

The management network for a host is disconnected.

This datastore is not added to your scope.

NEW QUESTION 15
A customer plans to deploy HPE SimpliVity 380 Gen10 LFF H and HPE SimpliVity 380 Gen10 SFF H nodes.
What should you recommend tor this setup?

Put each type of the nodes in a different federation.

Replace the LFF nodes with all-flash nodes.

Put all of the nodes in the same cluster.

Put SFF and LFF nodes in separate clusters.

NEW QUESTION 16
A customer wants to provide access to the HPE SimpliVity datastores for compute nodes running
CPU-intensive virtual machines. What should you tell the customer?

It is supported to connect up to 5 compute nodes per SimpliVity node.

Additional license is required to connect ESXi nodes to SimpliVity datastores.

Connecting ESXi compute nodes is possible only when VMFS datastores are configured at SimpliVity
Federation level

Compute nodes must reside in the same cluster as HPE SimpliVity nodes.

NEW QUESTION 17
What happens if an HPE mniStack Virtual Controller (VC) fails in a multi-node HPE SimpliVrty cluster?

All VMs on the node restart in a node where the replica resides.

HPE SimpliVity Intelligent Workload ptimizer restores the VC from backups.

The IP address of the VC fails over to another HPE SimpliVity node.

All VMs on the node go on standby mode to avoid data loss.

NEW QUESTION 18
A customer has some CPU intensive applications running that will be deployed in the virtual machines. The
customer is concerned that these virtual machines may impact the performance of the other virtual machines.
What should you recommend to avoid this potential problem and still leverage HPE SimpliVity features for
these virtual machines?

Present HPE SimpliVrty datastores to external ESXi system that will house these CPU intensive virtual
machines.

Add an external ESXi cluster to HPE SimpliVity Federation, and enable Intelligent Workload ptimizer.

Add an external ESXi system to HPE SimpliVity cluster, and enable DRS functionality for CPU
intensive virtual machines.

Deploy CPU intensive virtual machines on HPE SimpliVity, and configure for them CPU affinity parameter.

NEW QUESTION 19
A customer is analyzing data using HPE InfoSight for HPE SimpliVity. They found that the Total Data Stored
for a VM is significantly higher than the VM Storage Usage in vCenter. How do you explain these findings?

The VM is configured with RF3.

The Total Data Stored includes VM data, local backups, and remote backups.

The Total Data Stored includes the datastore size and its replicas.

The VM was thick provisioned.

NEW QUESTION 20
You are designing an HPE SimpliVity solution with HPE Storence.
Which design aspects will you evaluate to optimize replication performance?

Performance optimization features provided by VMFS datastores comapred to NFS datastores

Number of the HPE SimpliVlty clusters and Catalyst stores used

Intelligent Workload optimizer settings

HPE SimpliVity model used

NEW QUESTION 21
What is the difference between crash consistent and application consistent cloning methods?

Application-consistent clones allow the pending 10 operations to finish before committing them to the
database.

Both methods are the same; the only difference is speed of cloning.

Crash consistent method should be used only for the virtual machines with Fault Tolerance enabled.

Application consistent method is available only for Linux operating systems.

NEW QUESTION 22
You are designing a new HPE SimpliVity solution. You want to confirm your configuration is compatible and
supported with the customer requirements. Which items can you find in the HPE SimpliVity mniStack
Interoperability Guide? (Select two.)

GPU Accelerators

ESXi version

Guest S version

vSphere License

Processor model

NEW QUESTION 23
A customer has development virtual machines that do not require storage HA. How can the customer save
storage capacity within an HPE SimpliVity cluster?

By disabling HA cluster functionality for HPE SimpliVity Federation

By placing them on HPE Storence instead of HPE SimpliVity

By disabling the HA feature for only these virtual machines at vCenter Server

By creating a single-replica datastore for these virtual machines

NEW QUESTION 24
Hyper Protected refers to which HPE SimpliVity ability?

Backup or restore 1TB VM in less than 1 minute.

Restore individual files from a VM backup.

Define a storage policy using RAID 6 or RAID 60 to protect the VM.

Integrate with Veeam to provide an external backup solution.

NEW QUESTION 25
You want to use Lanamaric to collect Information from an existing customer environment to support the solution design process. The customer informed you that the existing ESXi infrastructure is not connected to the internet.
What can you do to collect the data using Lanamark?

Using REST API, retrieve performance data from HPE neView and upload to Lanamark analyzer.

Ask the customer to install a Lanamark agent on each ESXi server, and deploy a log collector on the workstation within the same network.

Download performance data collected Dy the vCenter Server, and upload them to Lanamark.

Download Lanamark Snap and use it to collect the data, and then upload manually to the Lanamark portal.

NEW QUESTION 26
Which functionality does HPE InfoSight for HPE SimpliVity provide?

balance workloads across HPE SimpllVity nodes based on utilization

recommendation for guest operating system settings optimization

automated firmware and software upgrades for registered customers

monitoring of virtual machine latency

NEW QUESTION 27
A customer plans to use HPE SimpliVity RapidDR, but is concerned about vCenter Server license cost. In
which deployment scenario is only a single vCenter Server required?

when less than 600 VMs is covered with a single recovery plan

when Enhanced Linked Mode is enabled for vCenter

when Intelligent Workload ptimizer is disabled

when federation is managed centrally

NEW QUESTION 28
A customer plans to deploy HPE SimpliVity 380 Gen10 LFF H and HPE SimpliVity 380 Gen10 SFF H nodes.
What should you recommend tor this setup?

Put each type of the nodes in a different federation.

Replace the LFF nodes with all-flash nodes.

Put all of the nodes in the same cluster.

Put SFF and LFF nodes in separate clusters.

HPE SimpliVity 380 Gen10 LFF H and HPE SimpliVity 380 Gen10 SFF H nodes are two types of HPE SimpliVity nodes that differ in their form factor, storage capacity, and performance. LFF stands for large form factor, which means that the node has 3.5-inch hard disk drives (HDDs) and can support up to 40 TB of raw storage capacity. SFF stands for small form factor, which means that the node has
2.5-inch solid state drives (SSDs) and can support up to 23.4 TB of raw storage capacity12.
HPE SimpliVity nodes can be grouped into clusters, which are logical units of compute and storage resources that share the same configuration and policies. HPE SimpliVity clusters can be further grouped into federations, which are collections of clusters that span across different physical locations and provide unified management and data protection34.
For this setup, the recommended design is to put SFF and LFF nodes in separate clusters, but within the same federation. According to the HPE SimpliVity Federation Design and Scaling Guide document, the following reasons support this recommendation:
Mixing SFF and LFF nodes in the same cluster can cause performance and capacity imbalance, as the SFF nodes have faster SSDs and lower storage capacity than the LFF nodes. This can affect the data distribution, deduplication, compression, and backup operations within the cluster .
Separating SFF and LFF nodes into different clusters can allow the customer to optimize the workload placement and performance based on the node characteristics. For example, the customer can use the SFF cluster for high-performance and low-capacity workloads, such as databases or virtual desktops, and use the LFF cluster for low-performance and high-capacity workloads, such as file servers or archives .
Keeping SFF and LFF nodes within the same federation can enable the customer to benefit from the centralized management and data protection features of HPE SimpliVity. The customer can use the same interface to monitor and control the nodes across the clusters, and use the same policies to backup and restore the data across the sites .
References:
1: HPE SimpliVity 380 Gen10 LFF H Node Data sheet 2: HPE SimpliVity 380 Gen10 SFF H Node Data sheet 3: HPE SimpliVity Data Virtualization Platform 4: HPE SimpliVity Federation Design and Scaling Guide : [HPE SimpliVity 380 Gen10 Node Data sheet – PSNow] : [HPE SimpliVity 380 Gen10 Node | HPE Store US] : [HPE SimpliVity Intelligent Workload Optimizer] : [HPE SimpliVity with HPE StoreOnce Reference Architecture] : [HPE SimpliVity Stretched Cluster Guide] : [HPE SimpliVity Remote RapidDR Software Installation and Startup Service]

NEW QUESTION 29
You want to use Lanamaric to collect Information from an existing customer environment to support the
solution design process. The customer informed you that the existing ESXi infrastructure is not connected to
the internet.
What can you do to collect the data using Lanamark?

Using REST API, retrieve performance data from HPE neView and upload to Lanamark analyzer.

Ask the customer to install a Lanamark agent on each ESXi server, and deploy a log collector on the
workstation within the same network.

Download performance data collected Dy the vCenter Server, and upload them to Lanamark.

Download Lanamark Snap and use it to collect the data, and then upload manually to the Lanamark
portal.

NEW QUESTION 30
At which level you can apply a backup policy?

cluster

datacenter

vCenter Server

datastore

NEW QUESTION 31
In an HPE SimpliVity 10-node cluster, a simultaneous increase of 10 requests across several VM caused a surge in 10 traffic in a single node. Which HPE SimpliVity feature can evenly distribute the 10s across the cluster?

Resource Balancer

Management Virtual Appliance

Arbiter

Intelligent Workload optimizer

HPE2-K45 certification exam is designed for IT professionals who want to validate their skills and knowledge in using HPE SimpliVity technology. HPE SimpliVity is a hyperconverged infrastructure solution that combines storage, compute, and networking in a single system. HPE2-K45 exam tests the candidate’s ability to deploy, manage, and troubleshoot HPE SimpliVity solutions.

Updated Verified Pass HPE2-K45 Exam – Real Questions and Answers: https://www.free4dump.com/HPE2-K45-braindumps-torrent.html

You may also like

Leave a Reply Cancel reply