[Sep-2026 Newly Released] 300-415 Dumps for CCNP Enterprise Certified [Q147-Q168]

5/5 - (1 vote)

[Sep-2026 Newly Released] 300-415 Dumps for CCNP Enterprise Certified

Updated Verified 300-415 dumps Q&As – 100% Pass

Cisco 300-415 exam is designed to test the candidates’ knowledge and skills in implementing Cisco SD-WAN solutions. Cisco SD-WAN is a Software-defined Wide Area Network technology that simplifies and optimizes the communication between different locations or branches of a company. Cisco SD-WAN solutions are widely used in modern businesses to improve performance, security, and reliability.

Resource 3 – Cisco Community

If you didn’t know, the vendor offers robust community support for test 300-415. Becoming a member of this community will lead to gaining insights on exam objectives with fellow exam-takers, exchanging ideas, getting a real-time solution to any exam problem directly from the certificate holders or experienced professionals, and having immediate knowledge about any new technology.

To prepare for the Cisco 300-415 exam, candidates should have a solid understanding of networking concepts, including TCP/IP, routing protocols, and network security. They should also have hands-on experience with Cisco products and SD-WAN solutions. Cisco offers training courses and study materials to help candidates prepare for the exam, including online courses, virtual labs, and study guides. Passing the Cisco 300-415 exam is a key step towards becoming a Cisco Certified Specialist in SD-WAN Solutions.

Q147. Drag and drop the steps from the left into the order on the right to upload software on vManage repository that is accessible from maintenance > Software Repository.

https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_18.2/Maintenance/Software_Repository

Q148. In a Cisco SD-WAN architecture, what is the role of the WAN Edge?

It provides orchestration to assist in automatic provisioning of WAN Edge routers and overlay

It is the management plane responsible for centralized configuration and monitoring

It is the control plane that builds and maintains network topology

It is the data plane that is responsible for forwarding traffic

Q149. Which pathway under Monitor > Network > Select Device is used to verify service insertion configuration?

Real Time

System Status

ACL Logs

Events

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge-20-x/policies-book/service-chaining.html

Q150. Which keyword is used to choose a specific type of tunnel when SLA class is matched by the data traffic?

sia-preferred-color

preferred-color

default

strict

The keyword preferred-color is used to choose a specific type of tunnel when SLA class is matched by the data traffic. The keyword sia-preferred-color is not a valid keyword. The keywords default and strict are used to specify the default tunnel and the strict tunnel, respectively.

Q151.

Refer to the exhibit. An administrator is configuring a policy in addition to an existing hub-and-spoke policy for two sites that should directly communicate with each other. How is this policy configured?

hub-and-spoke

mesh

import existing topology

custom control (route and TLOC)

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge/policies-book/controlpolicies.html#id_107219

Q152. Refer to the exhibit

Refer to the exhibit Which configuration must the engineer use to form underlay connectivity for the Cisco SD-WAN network?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q153. Which two sets of identifiers does OMP carry when it advertises TLOC routes between WAN Edge routers? (Choose two.)

TLOC public and private address, carrier, and preference

source and destination IP address, MAC, and site ID

system IP address, link color, and encapsulation

VPN ID, local site network, and BGP next-hop IP address

TLOC public and private address, tunnel ID, and performance

The identifiers that OMP carry when advertising TLOC routes to WAN Edge devices are:
– System IP address of the OMP speaker that originates the OMP route
– Color to identify the link type
– Encapsulation type on the transport tunnel
Origin (Source of the route, such as BGP, OSPF, connected, and static, and the metric associated with the original route).
Originator (OMP identifier of the originator of the route, which is the IP address from which the route was learned).
Preference (Degree of preference for an OMP route. A higher preference value is more preferred).
Service (Network service associated with the OMP route).
Site ID (Identifier of a site within the Cisco SD-WAN overlay network domain to which the OMP route belongs).

Q154. Drag and drop the steps from the left Into the order on the right to delete a software image for a WAN Edge router starting with Maintenance > Software Upgrade > Device list on vManage.

Q155. An engineer must configure local redundancy on a site. Which configuration accomplish this task?

vpn 0interface interface-name

tloc extension interlace nametloc extension interface interface name

vpn 0tloc extension interface

interface-flameinterface interface-name tloc-extension

Q156. Drag and drop the actions from the left into the correct sequence on the right to create a data policy to direct traffic to the Internet exit.

Q157. What is the default value (in milliseconds) set for the poll interval in the BFD basic configuration?

300,000

600,000

900,000

1,200,000

https://sdwan-
docs.cisco.com/Product_Documentation/vManage_Help/Release_18.2/Configuration/Templates/ BFD

Q158. Which command disables the logging of syslog messages to the local disk?

no system logging disk enable

no system logging disk local

system logging disk disable

system logging server remote

Q159. What is the advantage of installing the controller on-premises?

automatic geographical redundancy and security

full control of the data plane and the control plane

scalability and a cost-saving

ease of deployment and management

Q160. What are the two protocols redistributed into OMP? (Choose two.)

OSPF

RIP

LDP

RSVP

EIGRP

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/routing/ios-xe-17/routing-book-xe/m-unicast-routing.html

Q161. Which two algorithms authenticate a user when configuring SNMPv3 monitoring on a WAN Edge router? (Choose two.)

AES-256

SHA-1

AES-128

MDS

SHA-2

Q162. A WAN Edge device has several service VPNs with no routing protocol configured in the service VPNs The device must be configured so that all connected routes are visible in OMP for VPN 10 Which configuration meets the requirement?

Q163.

Refer to the exhibit The network team must configure El GRP peering at HQ with devices in the service VPN connected to WAN Edge CSRv. CSRv is currently configured with

Q164.

Refer to the exhibit Which NAT types must the engineer configure for the vEdge router to bring up the data plane tunnels?

Enable Full Cone NAT on the vEdge interface

Use public color on the TLOC

Use private color on the TLOC

Enable Symmetric MAT on the vEdge interface

Q165. What is an attribute of TLOC’?

encryption

local preference

tag

service

Q166.

Refer to the exhibit. Which configuration ensures that OSPP routes learned from Site2 are reachable at Stein and vice-versa?

Q167. Refer to the exhibit. A configuration change on WAN Edge (vEdge2) has brought down all the control connections. Which action resolves the issue?

Update configurations with the correct vBond IP.

Revert the site ID to restore control connections.

Ensure reachability to controllers.

Revert the system IP or clear control connections.

The output of the control connection table indicates that all control connections are in a
“tear_down” state, and the error is shown as DISTLOC (disallowed due to location). This typically happens when the system IP is changed on the WAN Edge device, which disrupts the control connections.
To resolve this:
Revert the system IP to its previous value. The system IP acts as the device’s unique identifier, and changing it can cause the SD-WAN controllers (vManage, vSmart, vBond) to reject the device.
Alternatively, clearing the control connections to reestablish them might also work once the correct system IP is configured.

Q168. An engineer must automate certificate signing through Cisco. Which vManage configuration achieves this task?