Pass Cisco 200-301 exam questions – convert Test Engine to PDF [Q414-Q437]

Rate this post

Pass Cisco 200-301 exam questions – convert Test Engine to PDF

Pass Your 200-301 Exam Easily – Real 200-301 Practice Dump Updated Apr 18, 2025

Cisco 200-301 Exam Certification Details:

Exam Registration	PEARSON VUE
Exam Code	200-301 CCNA
Sample Questions	Cisco 200-301 Sample Questions
Recommended Training	Implementing and Administering Cisco Solutions (CCNA)
Exam Name	Implementing and Administering Cisco Solutions
Exam Price	$300 USD
Number of Questions	90-110
Duration	120 minutes

NEW QUESTION 414
Refer to the exhibit. An engineer assigns IP addressing to the current VLAN with three PCs. The configuration must also account for the expansion of 30 additional VLANS using the same Class C subnet for subnetting and host count. Which command set fulfills the request while reserving address space for the expected growth?

Switch(config)#interface vlan 10
Switch(config-if)#ip address 192.168.0.1 265 255.255.252

Switch(config)#interface vlan 10
Switch(config-if)#ip address 192.168.0.1 255 255.255.248

Switch(config)#interface vlan 10
Switch(config-if)#ip address 192.168.0.1 255 255.255.0

Switch(config)#interface vlan 10
Switch(config-if)#ip address 192.168.0.1 255.255.255.128

NEW QUESTION 415
Refer to the exhibit.

An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right.

NEW QUESTION 416
Refer to the exhibit.

What does the host do when using the IPv4 Preferred function?

It continues to use a statically assigned IPv4 address

It forces the DNS server to provide the same IPv4 address at each renewal.

It requests the same IPv4 address when it renews its lease with the DHCP server.

It prefers a pool of addresses when renewing the IPv4 host IP address

NEW QUESTION 417
Refer to the exhibit.

A network engineer must configure the link with these requirements:
* Consume as few IP addresses as possible.
* Leave at least two additional useable IP addresses for future growth.
Which set of configurations must be applied?

NEW QUESTION 418
Refer to the exhibit. An engineer is updating the R1 configuration to connect a new server to the management network. The PCs on the management network must be blocked from pinging the default gateway of the new server.
Which command must be configured on R1 to complete the task?

R1(config)#ip route 172.16.2.2 255.255.255.248 gi0/1

R1(config)#ip route 172.16.2.2 255.255.255.255 gi0/0

R1(config)#ip route 172.16.2.0 255.255.255.0 192.168.1.15

R1(conflg)#ip route 172.16.2.0 255.255.255.0 192.168.1.5

NEW QUESTION 419
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?

cost

adminstrative distance

metric

as-path

NEW QUESTION 420
How do traditional campus device management and Cisco DNA Center device management differ in regards to deployment?

Cisco DNA Center device management can deploy a network more quickly than traditional campus device management

Traditional campus device management allows a network to scale more quickly than with Cisco DNA Center device management

Cisco DNA Center device management can be implemented at a lower cost than most traditional campus device management options

Traditional campus device management schemes can typically deploy patches and updates more quickly than Cisco DNA Center device management

NEW QUESTION 421
Which type of information resides on a DHCP server?

a list of the available IP addresses in a pool

a list of public IP addresses and their corresponding names

usernames and passwords for the end users in a domain

a list of statically assigned MAC addresses

NEW QUESTION 422
Refer to the exhibit. When PC 1 sends a packet to PC2,the packet has.
Which source and destination IP address when it arrives at interface Gi0/0 on router R2?

source 192.168.10.10 and destination 10.10.2.2

source 192.168.20.10 and destination 192.168.20.1

source 192.168.10.10 and destination 192.168.20.10

source 10.10.1.1 and destination 10.10.2.2

NEW QUESTION 423
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.

NEW QUESTION 424
When DHCP is configured on a router, which command must be entered so the default gateway is automatically distributed?

default-router

default-gateway

ip helper-address

dns-server

NEW QUESTION 425
Refer to the exhibit.

Which type of route does R1 use to reach host 10.10.13.10/32?

floating static route

host route

default route

network route

NEW QUESTION 426
Refer to the exhibit.

PC A is communicating with another device at IP address 10.227.225.255. Through which router does router Y route the traffic?

router A

router B

router C

router D

NEW QUESTION 427
Refer to the exhibit.

The Router1 routing table has multiple methods to reach 10.10.10.0/24 as shown. The default Administrative Distance is used. Drag and drop the network conditions from the left onto the routing methods that Router1 uses on the right.

NEW QUESTION 428
What are three parts of an IPv6 global unicast address? (Choose three.)

an interface ID that is used to identify the local host on the network

an interface ID that is used to identify the local network for a particular host.

a subnet ID that is used to identify networks inside of the local enterprise site

a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP

a global routing prefix that is used to identify the portion of the network address provided by a local administrator

NEW QUESTION 429
Drag and drop the Rapid PVST+ forwarding state actions from the left to the right. Not all actions are used.

NEW QUESTION 430
Which cable type must be used to interconnect one switch using 1000 BASE-SX GBiC modules and another switch using 1000 BASE-SX SFP modules?

LC to SC

SC t ST

SC to SC

LC to LC

NEW QUESTION 431
Refer to the exhibit.

All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB.
Based on the output shown, what is the most likely problem?

The access link needs to be configured in multiple VLANs.

The link between the switches is configured in the wrong VLAN.

The link between the switches needs to be configured as a trunk.

VTP is not configured to carry VLAN information between the switches.

Switch IP addresses must be configured in order for traffic to be forwarded between the switches

NEW QUESTION 432
Refer to the exhibit.

Based on the LACP neighbor status, in which mode is the SW1 port channel configured?

passive

mode on

auto

active

NEW QUESTION 433
DRAG DROP
Drag and drop the benefits of a Cisco Wireless Lan Controller from the left onto the correct examples on the right.
Select and Place:

NEW QUESTION 434
Refer to the exhibit.

A network administrator assumes a task to complete the connectivity between PC A and the File Server.
Switch A and Switch B have been partially configured with VLAN 10, 11, 12, and 13. What is the next step in the configuration?

Add PC A to VLAN 10 and the File Server to VLAN 11 fa VLAN segmentation

Add VLAN 13 to the trunk links on Switch A and Switch B for VLAN propagation

Add a router on a stick between Switch A and Switch B allowing for Inter-VLAN routing.

Add PC A to the same subnet as the Fie Server allowing for intra-VLAN communication.

NEW QUESTION 435
Refer to the exhibit. Web traffic is coming in from the WAN interface. Which route takes precedence when the router is processing traffic destined for the LAN network at 10 0.10.0/24?