Latest [Nov 15, 2023] Realistic Verified CQE Dumps [Q63-Q87]

5/5 - (1 vote)

Latest [Nov 15, 2023] Realistic Verified CQE Dumps

Pass ASQ CQE Exam Updated 162 Questions

ASQ CQE certification exam is an advanced level certification that requires a minimum of eight years of work experience in the quality engineering field. CQE exam consists of 175 multiple-choice questions and is four hours in length. CQE exam is computer-based and is administered at Prometric testing centers around the world. Successful completion of the CQE exam demonstrates a high level of knowledge and expertise in quality engineering, which can lead to better job opportunities, increased earning potential, and a greater level of professional recognition in the field.

Q63. In the planning of a new major manufacturing program, the greatest quality effort should be put logically in

Inspection of product.

Nondestructive testing equipment.

Nonconformance to specifications.

Prevention of occurrence of substandard quality.

Q64. A single sampling plan calls for a sample size of 80 with an acceptance number of five and a rejection number of six If the quality of the submitted lots 10 percent defective. then the percent of lots expected to be accepted in the long run is approximately.

10%

20%

30%

Q65. What order do the following corrective action steps normally take for nonconforming product?
I. Analyze the problem.
II. Assign responsibility.
III. Take preventive action.
IV. Evaluate potential importance.
V. Investigate possible causes.

I, II, V, IV, III

II, IV, V, I, III

V, II, IV, I, III

II, I, IV, V, III

Q66. The term “quality audit” can refer to the appraisal of the quality system of
I. An entire plant or company.
II. One product.
III. One major quality activity.

I only

I, II and III

II and III only

I and III only

Explanation/Reference:

Q67. The distribution of a characteristic is negatively skewed. The sampling distribution of the mean for large samples is:

Negatively skewed.

Approximately normal.

Positively skewed.

Lognormal.

Q68. Normally, complaint data for both a product or service organization should provide

An indication of the organizational areas creating the most problems.

The degree or extent of customers dissatisfaction.

The appropriate corrective action to take.

The total quality costs for the organization.

Q69. Which of the following are likely to be positive actions in obtaining a supplier’s commitment to quality improvement?
. Involving the supplier early in the product development stage. . Partially reimbursing the supplier, when the product is rejected. . Establishing a firm schedule of required product quantities and dates. . Providing meaningful and timely quality performance feedback.

IandIVonly

I,IIandIVonly

I,IIIandIVonly

I,II,IIIandIV

Q70. A vendor may be audited both before and during the execution of a contract. During such a vendor audit, the focus may be directed at the management and resource management of the company. Which of the following areas would be EXCLUDED during such an audit?

Use and planning of time, manpower and training.

Defined quality responsibilities.

Company philosophy and organizational charts.

Design and process capabilities.

Q71. An experiment with two factors, in which all levels of one variable are run at each level of the second variable, is called a

One-way experiment.

Latin square experiment.

Factorial experiment.

Fractional factorial experiment.

Q72. The steeper the OC-curve, the

Less protection for both producer and consumer.

More protection for both producer and consumer.

The lower the AQL.

The smaller the sample size.

Q73. Which of the following are the MOST logical reasons for providing source inspection?
I. The supplier has consistently shown poor out-going quality.
II. The key inspection points are hidden after assembly at the suppliers’ plant.
III. The supplier requests the inspection to save them potential shipping expenses.
IV. The criticality of the product warrants it.

I, II and IV only

II and IV only

II, III and IV only

I, II, III and IV

Explanation

Q74. In nonparametric statistics:
. No assumptions are made concerning the distribution from which the samples are taken.
. The parameters of the distribution do not relate to the parameters of the sample.
. The sample and the distribution must have no parameters in common.

I only

IIonly

IIIonly

IIandIIIonly

Q75. An audit will be viewed as a constructive service to the function which is audited when it

Is conducted by nontechnical auditors.

Proposes corrective action for each item uncovered.

Furnishes enough detailed facts so the necessary action can be determined.

Is general enough to permit managerial intervention.

Q76. What is the standard deviation of the following data?
3.2, 3.1, 3.3, 3.3, 3.1

3.2

0.0894

0.1

0.0498

Q77. In order to implement a continuous improvement strategy, a company may institute a steering committee or improvement council. Which of the following would generally NOT be a task performed by this council?

The development of a quality vision for the company.

The combined development and implementation of the company improvement strategy.

The definition of certain quality objectives for sections of the company.

The development of quality education and communication modules for the organization.

Q78. Information that is received by upper management, is often distorted. Which of the following actions is effective in countering this problem?
I. Stop killing the messenger.
II. Establishing an open door policy.
III. Practice management by walking around.

I only

I and II only

I and III only

I, II and III

Q79. Quality audits do NOT provide

Answers to quality system deficiencies.

Highlighting of faulty company operations.

An index of quality needs.

An anticipated indication of customer acceptance of the product.

Q80. Which of the following problem-solving tools is a column graph which displays a static picture of the process?

Pareto chart.

Control chart.

Histogram.

Cause and effect diagram.

Q81. A “p” chart

Can be used for only one type of defect per chart.

Plots the number of defects in a sample.

Plots either the fraction or percent defective in order of time.

Plots variations in dimensions.

Q82. In the planning of a new major manufacturing program, the greatest quality effort should be put logically in

Inspection of product.

Nondestructive testing equipment.

Nonconformance to specifications.

Prevention of occurrence of substandard quality.

Q83. What does a corrective action do to prevent an existing noncomformity, defect or undesirable situation from recurring?

Minimizes it.

Takes repercussions against those responsible.

Takes action against it.

Eliminates it.

Q84. The Dodge-Romig tables are designed to minimize which of the following parameters?

AOQL

AQL

ATI

AOQ

Q85. Normally, complaint data for both a product or service organization should provide

An indication of the organizational areas creating the most problems.

The degree or extent of customers dissatisfaction.

The appropriate corrective action to take.

The total quality costs for the organization.

Q86. An X-bar and R chart with n=5 has been plotted for some time and has demonstrated random variation.
Upon review of the last 30 plot points, the expected number of runs around the centerline on the X-bar chart is expected to be approximately which of the following?

Q87. Reliability prediction is
. The process of performance estimation.
. The process of estimating the probability that a product will perform its intended function for a stated time.
. The process of telling “how you can get there from here”.

I only

IIonly

IIandIIIonly

I,IIandIII

Loading …