H35-460 Practice Exam and Study Guides – Verified By Free4Dump Updated 221 Questions [Q76-Q97]

QUESTION 76
What is the maximum number of UBBPwfl boards supported by the BBU5900?

QUESTION 77
To enable data distribution with NR base stations in NSA networks, you need to configure the default bearer mode of NSA DC to SCG_SPLIT_BEARER on the NR side

QUESTION 78
gNodeB passes Ethernet frames with the TAG flag, called VLAN tagged frames.

QUESTION 79
Under the NSA network, the X2 interface of gNB can be self-established based on S1 and U2000.

QUESTION 80
Which of the following MML commands are required to add neighbor information across gNodeB?

QUESTION 81
Which of the “RF unit working system” should be selected when the gNodeB adds the NR radio unit AAU?

QUESTION 82
The UMPT board performs functions such as signaling processing, operation and maintenance, transmission clock extraction and channel coding.

QUESTION 83
In the DC scheme between stations, the X2 interface can be used to realize the interworking between LTE and NR stations, but how long does the transmission delay take?

QUESTION 84
Which of the following signals reflects the coverage of the NR network uplink?

QUESTION 85
NR began to support the base station version of the UBBPg half-width board, which of the following versions started?

QUESTION 86
Regarding DWP, what are the correct descriptions of the following? (Multiple Choice)

QUESTION 87
On the NSA network, what objects are unnecessary in the self-built scenario of the S1-U interface of the gNodeB? (Multiple Choice)

QUESTION 88
5G RAN side service slice management, which of the following facilities is implemented?

QUESTION 89
Which of the following bands is not included in the candidate SUL spectrum for uplink and downlink decoupling in the C-band?

QUESTION 90
Which application scenario of 5G is not described in 3GPP Release 15?

QUESTION 91
When the port of the SC2 link of the X2 interface is negotiated, the local and the peer can share the same port number.

QUESTION 92
In order to obtain a high upstream rate, the transmit power of the CPE needs to be set to the maximum power of the generator

QUESTION 93
How many PCIs does the 5G cell support?

QUESTION 94
Which MML command is used when gNodeB add the DU cell in the 5G RAN2.0 version?

QUESTION 95
What are the configuration modules that differ between the gNodeB data configuration and the LTE data configuration MML command?

QUESTION 96
What is the recommended eCPRI connection bandwidth for the 100Mhz 64T64 cell?

QUESTION 97
Under the EN-DC architecture, the eNodeB/gNodeB only supports the configuration of the X2 finger based on the EndPoint method.