2026 Updated Verified 350-601 Q&As – Pass Guarantee or Full Refund [Q75-Q92]

Rate this post

2026 Updated Verified 350-601 Q&As – Pass Guarantee or Full Refund

[Feb-2026] 350-601 Certification with Actual Questions from Free4Dump

Cisco 350-601 certification exam is an important certification for IT professionals who want to enhance their skills and knowledge in data center technologies. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification demonstrates the candidate’s ability to implement and troubleshoot data center infrastructure, network infrastructure, storage infrastructure, compute infrastructure, automation, and security. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification is highly valued in the industry and can lead to better job opportunities and higher salaries.

The 350-601 DCCOR exam covers a wide range of topics, including network infrastructure, virtualization, storage infrastructure, automation, and security. Candidates are expected to have a deep understanding of these topics and be able to apply them in real-world scenarios. 350-601 exam also tests the candidate’s knowledge of Cisco data center products and solutions, including Cisco Application Centric Infrastructure (ACI), Cisco Unified Computing System (UCS), and Cisco Nexus switches. Overall, the 350-601 DCCOR exam is a comprehensive test of an IT professional’s knowledge and skills in data center core technologies.

NEW QUESTION 75
An engineer is implementing a Cisco ACI fabric and must use static VLAN range as part of a VMM deployment. The static VLAN must be incorporated into the dynamic VLAN pool. The existing VLAN pool is set for dynamic allocation. Which action accomplishes this goal?

Add the VLAN to the pool configured with Inherit Allocation Mode from parent.

Change the existing VLAN pool to static allocation mode.

Add a static VLAN allocation range to the VLAN pool.

Create a static reservation within the dynamic VLAN pool.

NEW QUESTION 76
Refer to the exhibit. An engineer reported suspicious behavior in a server farm that is deployed on the 198.19.1.0/24 subnet. The traffic must be captured only from the server with the IP address of 198.19.1.19/24. The traffic analyzer is connected to the same switch as the server farm. Which configuration set captures the traffic?

switch(config)# ip access-list match_Server_pkts
switch(config-acl)# permit ip 198.19.1.19 0.0.0.0 any
switch(config)# monitor session 1
switch(config-monitor)# filter access-group span_filter

switch(config)# ip access-list match_Server_pkts
switch(config-acl)# permit ip 198.19.1.19 0.0.0.0 any
switch(config)# monitor session 1
switch(config-monitor)# filter access-group 5

switch(config)# ip access-list match_Server_pkts
switch(config-acl)# permit ip 198.19.1.19 255.255.255.255 any
switch(config)# monitor session 1
switch(config-monitor)# filter access-group span_filter

switch(config)# ip access-list match_Server_pkts
switch(config-acl)# permit ip 198.19.1.19 255.255.255.0 any
switch(config)# monitor session 1
switch(config-monitor)# filter access-group span_filter

NEW QUESTION 77
What is a key feature of Cisco Intersight in the context of IJCS management?

It acts as a physical network switch.

It provides centralized management and monitoring from the cloud.

It provides centralized management and monitoring from fabric interconnects.

It acts as a virtual network switch.

NEW QUESTION 78
Refer to the exhibit.

Which command needs to be added to the line starling with the “file” keyword to have the generated running-config file with the name ‘fusion-config_’ and current date?

(‘fusion-config_ + date’)

str.(‘fusion-config_’) + date

string((‘fusion-config_’) + date)

(‘fusion-config_’) + date

NEW QUESTION 79
An engineer must implement the FCoE on the Cisco Nexus 9000 Series Switch-based infrastructure. The deployment will contain dual-homed fabric extenders and must support jumbo frames with port channels.
Which two sets of actions complete the configuration? (Choose two.)

Option A

Option B

Option C

Option D

Option E

NEW QUESTION 80
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?

switch(config-vsan-cb># vsan 100 bind interface fc 3/1

switch<config-vsan-db)# vsan 100 bind interface vfc 31

switch(config-vsan-db># vsan 100 fc 3/1

switch(config-vsan-db)# vsan 100 interface vfc 31

NEW QUESTION 81

An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)

Configure the switchport mode SD under interface fc2/1.

Configure switchport speed 4000 under interface fc2/2

Configure the switchport monitor under interface fc2/2.

Configure the switchport mode SD under interface fc2/2.

Configure session type fc under monitor session 1.

NEW QUESTION 82
A network architect must design an automation solution to initially support networking and also support the server infrastructure in the future. To keep configuration consistency, the network team requires a solution that enforces the desired state of the network and reverts any manual configuration. Which solution meets these goals?

NX-API

Ansible

Terraform

Puppet

NEW QUESTION 83
An engineer must create a backup file of the entire Cisco UCS system before the maintenance window starts. The backup file must include these attributes:
– all logical configuration settings such as service profiles. VLANs.
and VSANs
– all Cisco UCS usernames. roles, and locales
– all Cisco UCS system settings
Which backup type must be selected to achieve this goal?

All Configuration

Full State

System Configuration

Logical Configuration

NEW QUESTION 84
A customer undergoes an IT security review assessment.
The auditor must have read-only access to the Cisco Nexus 9000 Series Switch to perform the configuration review.
The customer implements this security role for the auditor:
role name audit
rule 1 permit command *
rule 2 – Output omitted –
username auditor password C4SAFF0B96EB0045$c0 role audit
Which configuration snippet must complete the configuration?

deny command write*

permit command enable

permit command show *

deny command configure terminal

NEW QUESTION 85
Cisco Nexus 9000 Series Switches are configured with LACP protocol and default aging timers. What is the impact on the LACP peer during an ISSU upgrade?

The LACP peer connection terminates.

The LACP peer session remains up.

The LACP peer renegotiates the adjacency.

The LACP peer connection resets.

NEW QUESTION 86
Refer to the exhibit.

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

adapters

board controller

IOMs

BIOS

Cisco UCS Manager

NEW QUESTION 87
An engineer configures the properties of a cisco UCS cisco integrated Management controller network adapter for a standalone cisco C-Series server. The Fallback Timeout in the vNIC was set to 600. When the failure occurs. The secondary must be used and then fallback when the primary interface becomes available again.
Which action be taken to meet these requirements?

Set default VLAN on the adapters.

Increase Cos to 6.

Disable VNTAG mode.

Enable Uplink failover.

NEW QUESTION 88
Drag and Drop Question
Refer to the exhibit. The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1.

Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used.

NEW QUESTION 89
Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 series Switch are true? (Choose two.)

If an upgrade is interrupted, the upgrade continues after a connection is restored.

The upgrade can be performed from the standby supervisor module.

The active supervisor can be upgraded.

Modules must be online to be upgraded.

The Upgrade process disrupts only the module that is being upgraded.

NEW QUESTION 90
The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two characteristics must be considered? (Choose two.)

The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.

The rx/tx option is available for VLAN or VSAN SPAN sessions.

SPAN source port can be monitored in multiple SPAN sessions.

Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port.

A SPAN source port cannot be a destination SPAN port.

NEW QUESTION 91
Drag and Drop Question
Refer to the exhibit. An administrator is deploying BGP to geographically connect two data center sites. Both sites are configured for dual-stack routed protocols. The administrator must inject the IPv6 network 2001:AE4:1::/64 into the IPv6 unicast database. Drag and drop the SiteA commands from the right into the blanks in the configuration on the left. Commands are used more than once.

NEW QUESTION 92
A network automation engineer must configure a Cisco NX-OS REST API on a Cisco 9000 Series Switch with these requirements:
* NX-API REST and the DME database must be enabled.
* The NX-API REST must listen for HTTP traffic on port 83.
* The HTTPS certificate must be uploaded.
Which configuration set must be used to accomplish these goals?

feature nxapi
nxapi (tcp) port 83
nxapi certificate {httpscrt}

feature nxapi
nxapi (tcp) port 83
nxapi certificate {httpscrt}
nxapi certificate enable

feature nxapi
nxapi (http) port 83
nxapi certificate {httpscrt}

feature nxapi
nxapi {http} port 83
nxapi certificate {httpscrt | httpskey}
nxapi certificate enable