[Jan-2026] The Fortinet NSE8_812 Exam Test For Brief Preparation [Q22-Q46]

Rate this post

[Jan-2026] The Fortinet NSE8_812 Exam Test For Brief Preparation

Revolutionary Guide To Exam Fortinet Dumps

To pass the Fortinet NSE8_812 exam, candidates need to demonstrate their knowledge and skills in configuring, managing, and troubleshooting Fortinet’s security solutions. NSE8_812 exam covers a broad range of topics, including advanced threat protection, network design, virtual private networks (VPNs), and security management. Candidates are required to have a deep understanding of Fortinet’s products and solutions, as well as the ability to apply this knowledge to solve complex security challenges.

Fortinet NSE8_812 exam is a two-hour, multiple-choice exam that consists of 60 questions. The passing score for NSE8_812 exam is 70%. NSE8_812 exam can be taken in person at a proctored testing center or online using a remote proctoring service. NSE8_812 exam fee varies by location and can be found on the Fortinet website.

QUESTION 22
Refer to the exhibit.

You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:

FGT_1 and FGT_3 are configured with the default setting. Which statement is true for the synchronization of fabric-objects?

Objects from the FortiGate FGT_2 will be synchronized to the upstream FortiGate.

Objects from the root FortiGate will only be synchronized to FGT__2.

Objects from the root FortiGate will not be synchronized to any downstream FortiGate.

Objects from the root FortiGate will only be synchronized to FGT_3.

QUESTION 23
Refer to the exhibits.

A customer is trying to restore a VPN connection configured on a FortiGate. Exhibits show output during a troubleshooting session when the VPN was working and the current baseline VPN configuration.

Which configuration parameters will restore VPN connectivity based on the diagnostic output?

QUESTION 24
Refer to the exhibit, which shows a VPN topology.

The device IP 10.1.100.40 downloads a file from the FTP server IP 192.168.4.50 Referring to the exhibit, what will be the traffic flow behavior if ADVPN is configured in this environment?

All the session traffic will pass through the Hub

The TCP port 21 must be allowed on the NAT Device2

ADVPN is not supported when spokes are behind NAT

Spoke1 will establish an ADVPN shortcut to Spoke2

QUESTION 25
Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

Report

FTP

API

SCP

QUESTION 26
Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

Report

FTP

API

SCP

QUESTION 27
You must analyze an event that happened at 20:37 UTC. One log relevant to the event is extracted from FortiGate logs:

The devices and the administrator are all located in different time zones Daylight savings time (DST) is disabled
* The FortiGate is at GMT-1000.
* The FortiAnalyzer is at GMT-0800
* Your browser local time zone is at GMT-03.00
You want to review this log on FortiAnalyzer GUI, what time should you use as a filter?

20:37:08

10:37:08

17:37:08

12.37:08

QUESTION 28
Refer to the exhibits.

A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.) A)

B)

Option A

Option B

Option C

Option D

QUESTION 29
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

FAC2 can only process requests when FAC1 fails.

FAC2 can have its HA interface on a different network than FAC1.

The FortiToken license will need to be installed on the FAC2.

FSSO sessions from FAC1 will be synchronized to FAC2.

QUESTION 30
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration.
Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

QUESTION 31
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration. Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

QUESTION 32
Refer to the exhibits.

The exhibits show a FortiGate network topology and the output of the status of high availability on the FortiGate.
Given this information, which statement is correct?

The ethertype values of the HA packets are 0x8890, 0x8891, and 0x8892

The cluster mode can support a maximum of four (4) FortiGate VMs

The cluster members are on the same network and the IP addresses were statically assigned.

FGVMEVLQOG33WM3D and FGVMEVGCJNHFYI4A share a virtual MAC address.

QUESTION 33
You deployed a fully loaded FG-7121F in the data center and enabled sslvpn-load-balance. Based on the behavior of this feature which statement is correct?

You can use src-ip or dst-ip-dport on dp-load-distribution-method to make SSL VPN load balancing work as expected.

If an FPM goes down, SSL VPN IP pool IP addresses will be re-allocated to the remaining FPMs.

To have better traffic distribution you should use IP pools that increment in multiples of 12.

Enabling SSL VPN load balancing will clear the session table.

QUESTION 34
You want to use the MTA adapter feature on FortiSandbox in an HA-Cluster. Which statement about this solution is true?

The configuration of the MTA Adapter Local Interface is different than on port1.

The MTA adapter is only available in the primary node.

The MTA adapter mode is only detection mode.

The configuration is different than on a standalone device.

QUESTION 35
An administrator has configured a FortiGate device to authenticate SSL VPN users using digital certificates. A FortiAuthenticator is the certificate authority (CA) and the Online Certificate Status Protocol (OCSP) server.
Part of the FortiGate configuration is shown below:

Based on this configuration, which two statements are true? (Choose two.)

OCSP checks will always go to the configured FortiAuthenticator

The OCSP check of the certificate can be combined with a certificate revocation list.

OCSP certificate responses are never cached by the FortiGate.

If the OCSP server is unreachable, authentication will succeed if the certificate matches the CA.

QUESTION 36
Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

1 redundant packet for every 10 base packets

3 redundant packet for every 5 base packets

2 redundant packet for every 8 base packets

3 redundant packet for every 9 base packets

QUESTION 37
SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.
You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.
What should you configure?

Configure local out traffic to use the outgoing interface based on SD-WAN rules with a manual defined IP associated to a loopback interface and configure an SD-WAN rule from the loopback to the DNS server.

Configure an SD-WAN rule to the DNS server and use the FortiGate interface IPs in the source address.

Configure two DNS servers and use DNS servers recommended by the two internet providers.

Configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server.

QUESTION 38
You are creating the CLI script to be used on a new SD-WAN deployment You will have branches with a different number of internet connections and want to be sure there is no need to change the Performance SLA configuration in case more connections are added to the branch.
The current configuration is:

Which configuration do you use for the Performance SLA members?

set members any

set members 0

current configuration already fulfills the requirement

set members all

QUESTION 39
Refer to the exhibits, which show a firewall policy configuration and a network topology.

An administrator has configured an inbound SSL inspection profile on a FortiGate device (FG-1) that is protecting a data center hosting multiple web pages-Given the scenario shown in the exhibits, which certificate will FortiGate use to handle requests to xyz.com?

FortiGate will fall-back to the default Fortinet_CA_SSL certificate.

FortiGate will reject the connection since no certificate is defined.

FortiGate will use the Fortinet_CA_Untrusted certificate for the untrusted connection,

FortiGate will use the first certificate in the server-cert list-the abc.com certificate

QUESTION 40
Refer to the exhibit.

To facilitate a large-scale deployment of SD-WAN/ADVPN with FortiGate devices, you are tasked with configuring the FortiGate devices to support injecting of IKE routes on the ADVPN shortcut tunnels.
Which three commands must be added or changed to the FortiGate spoke config vpn ipsec phasei-interface options referenced in the exhibit for the VPN interface to enable this capability? (Choose three.)

set net-device disable

set mode-cfg enable

set ike-version 1

set add-route enable

set mode-cfg-allow-client-selector enable

QUESTION 41
A remote IT Team is in the process of deploying a FortiGate in their lab. The closed environment has been configured to support zero-touch provisioning from the FortiManager, on the same network, via DHCP options. After waiting 15 minutes, they are reporting that the FortiGate received an IP address, but the zero-touch process failed.
The exhibit below shows what the IT Team provided while troubleshooting this issue:

Which statement explains why the FortiGate did not install its configuration from the FortiManager?

The FortiGate was not configured with the correct pre-shared key to connect to the FortiManager

The DHCP server was not configured with the FQDN of the FortiManager

The DHCP server used the incorrect option type for the FortiManager IP address.

The configuration was modified on the FortiGate prior to connecting to the FortiManager

QUESTION 42
A customer wants to use the FortiAuthenticator REST API to retrieve an SSO group called SalesGroup. The following API call is being made with the ‘curl’ utility:

Which two statements correctly describe the expected behavior of the FortiAuthenticator REST API? (Choose two.)

Only users with the “Full permission” role can access the REST API

This API call will fail because it requires that API version 2

If the REST API web service access key is lost, it cannot be retrieved and must be changed.

The syntax is incorrect because the API calls needs the get method.

QUESTION 43
Refer to the exhibit.

What is happening in this scenario?

The user status changed at FortiClient EMS to off-net.

The user is authenticating against a FortiGate Captive Portal.
C The user is authenticating against an IdP.

The user has not authenticated on their external browser.

QUESTION 44
Refer to the exhibit.

You have been tasked with replacing the managed switch Forti Switch 2 shown in the topology.
Which two actions are correct regarding the replacement process? (Choose two.)

After replacing the FortiSwitch unit, the automatically created trunk name does not change

CLAG-ICL needs to be manually reconfigured once the new switch is connected to the FortiGate

After replacing the FortiSwitch unit, the automatically created trunk name changes.

MCLAG-ICL will be automatically reconfigured once the new switch is connected to the FortiGate.

QUESTION 45
You deployed a fully loaded FG-7121F in the data center and enabled sslvpn-load-balance. Based on the behavior of this feature which statement is correct?

You can use src-ip or dst-ip-dport on dp-load-distribution-method to make SSL VPN load balancing work as expected.

If an FPM goes down, SSL VPN IP pool IP addresses will be re-allocated to the remaining FPMs.

To have better traffic distribution you should use IP pools that increment in multiples of 12.

Enabling SSL VPN load balancing will clear the session table.

QUESTION 46
Refer to the exhibit showing the history logs from a FortiMail device.

Which FortiMail email security feature can an administrator enable to treat these emails as spam?