Download Free Cisco 300-410 Real Exam Questions Download [Q289-Q307]

Rate this post

Download Free Cisco 300-410 Real Exam Questions Download

Latest Cisco 300-410 Real Exam Dumps PDF

Cisco 300-410 exam is designed for IT professionals who are interested in becoming certified in implementing Cisco enterprise advanced routing and services. 300-410 exam is an important step for those who want to demonstrate their knowledge and skills in deploying and managing advanced routing and services in enterprise networks.

What Does a Cisco Certified Entry Network Technician (CCENT) Do?

Explanation of these topics include configuration, cabling, patching, troubleshooting and security. Reach out to the global world and expand your business by achieving your goal. Explanation of concepts such as IP addressing, subnets, default gateway and routing are part of this Cisco certification. Learn the latest Cisco certification with the help of Cisco 300-410 exam dumps. Reach out to the global world by filling in the knowledge gap in the IT industry.

Q289. An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE.
Which action should be taken to resolve this issue?

match the passwords

match the hello timers

match the MTUs

match the network types

Q290. Refer to the exhibit.

User in the branch network of 2001. db8 0.4 report they cannot access the internet.
Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?

Issue the eigrp stub command on R1

Issue the no neighbor stub command on R2.

Issue the eighr command on R2.

Issue the no eighrp stub command on R2.

Q291. Drag and drop the LDP features from the left onto the descriptions on the right

Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_ldp/configuration/15-sy/mp-ldp-15-sy-boo k/mp-ldp-inbound-filtr.html

Q292. Refer to the exhibit.

The administrator configured the network devices for end reachability, but the ASBRs are not propagating routes to each other. Which set of configuration resolved this issue?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q293. Refer to the exhibit.

Routers R1 and R2 have established a network adjacency using EIGRP, and both routers are advertising subnets to its neighbor. After issuing the show ip EIGRP topology all-links command in R1, some prefixes are no showing R2 as a successor. Which action resolves the issue?

Rectify the incorrect router ID in R2.

Enable split-horizon.

Configure the network statement on the neighbor.

Resolve the incorrect metric on the link.

Q294. Which is statement about IPv6 inspection is true?

It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables

It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables

It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables

It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.

Q295. Refer to the exhibit. An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen.
What is the reason for this?

Dynamic routing protocols always have priority over static routes.

The metric of the OSPF route is lower than the metric of the static route.

The configured AD for the static route is higher than the AD of OSPF.

The syntax of the static route is not valid, so the route is not considered.

Section: Layer 3 Technologies

Q296. Refer to the exhibit.

The administrator is trying to overwrite an existing file on the TFTP server that was previously uploaded by another router. However, the attempt to update the file fails. Which action resolves this issue?

Make the packages.conf file executable by all on the TFTP server

Make the packages.conf file writable by all on the TFTP server

Make sure to run the TFTP service on the TFTP server

Make the TFTP folder writable by all on the TFTP server

Q297. Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.

Q298. An engineer received a ticket about a router that has reloaded. The monitoring system graphs show different traffic patterns between logical and physical interfaces when the router is rebooted. Which action resolves the issue?

Configure the snmp ifindex persist command globally.

Clear the logical interfaces with snmp ifindex clear command

Configure the snmp ifindex persist command on the physical interfaces.

Trigger a new snmpwalk from the monitoring system to synchronize interface OlDs

Q299. A network administrator is troubleshooting a high utilization issue on the route processor of a router that was reported by NMS The administrator logged into the router to check the control plane policing and observed that the BGP process is dropping a high number of routing packets and causing thousands of routes to recalculate frequently. Which solution resolves this issue?

Police the cir for BGP, conform-action transmit, and exceed action transmit.

Shape the pir for BGP, conform-action set-prec-transmit, and exceed action set-frde-transmit.

Shape the cir for BGP. conform-action transmit, and exceed action transmit.

Police the pir for BGP, conform-action set-prec-transmit, and exceed action set-clp-transmit.

CIR (Committed Information Rate) is the minimum guaranteed traffic delivered in the network.
PIR (Peak Information Rate) is the top bandwidth point of allowed traffic in a non busy times without any guarantee.
+ Policing: is used to control the rate of traffic flowing across an interface. During a bandwidth exceed (crossed the maximum configured rate), the excess traffic is generally dropped or remarked. The result of traffic policing is an output rate that appears as a saw-tooth with crests and troughs. Traffic policing can be applied to inbound and outbound interfaces. Unlike traffic shaping, QoS policing avoids delays due to queuing. Policing is configured in bytes.
+ Shaping: retains excess packets in a queue and then schedules the excess for later transmission over increments of time. When traffic reaches the maximum configured rate, additional packets are queued instead of being dropped to proceed later. Traffic shaping is applicable only on outbound interfaces as buffering and queuing happens only on outbound interfaces. Shaping is configured in bits per second.
Therefore in this case we can only policing, not shaping as traffic shaping is applicable only on outbound interfaces as buffering and queuing happens only on outbound interfaces. Moreover, BGP traffic is not important so we can drop the excess packets without any problems.
And we only policing the PIR traffic so that the route processor is not overwhelmed by BGP calculation.
Note: The “set-prec-transmit” is the same as “transmit” command except it sets the IP Precedence level as well. The “set-clp-transmit” sets the ATM Cell Loss Priority (CLP) bit from 0 to 1 on the ATM cell and transmits the packet.

Q300. An engineer is implementing a coordinated change with a server team. As part of the change, the engineer must configure interlace GigabitEthernet2 in an existing VRF “RED” then move the interface to an existing VRF “BLUE” when the server team is ready. The engineer configured interface GigabitEthemet2 in VRF
“RED”

Which configuration completes the change?

interface GigabitEthernet2
no ip address
vrf forwarding BLUE

interface GigabitEthernet2
no vrf forwarding RED
vrf forwarding BLUE
ip address 10.0.0.0 255.255.255.254

interface GigabitEthernet2
no vrf forwarding RED
vrf forwarding BLUE

interface GigabitEthernet2
no ip address
ip address 10.0.0.0 255.255.255.254
vrf forwarding BLUE

Explanation
When assigning an interface to a VRF, the IP address will be removed so we have to reassign the IP address to that interface.

Q301. Refer to the exhibit.

Refer to the exhibit An engineer is troubleshooting an OSPF adjacency issue between directly connected routers R1 and R2 Which configuration resolves the issue?

Q302. Drag and drop the operations from the left onto the locations where the operations are performed on the right.

Explanation
Label Switch Router 1. Reads labels and forwards the packet based on the based on the label.
2. Performs PHP
Label Edge Router: 1 Assigns labels and unlabeled packets.
2. Handles traffic between multiple VPNs

Q303. Refer to the exhibit.

R2 is a route reflector, and R1 and R3 are route reflector clients. The route reflector learns the route to 172.16.25.0/24 from R1, but it does not advertise to R3. What is the reason the route is not advertised?

R2 does not have a route to the next hop, so R2 does not advertise the prefix to other clients.

Route reflector setup requires full IBGP mesh between the routers.

In route reflector setup, only classful prefixes are advertised to other clients.

In route reflector setups, prefixes are not advertised from one client to another.

Q304. Refer to the exhibit.

A network administrator sets up an OSPF routing protocol for a DMVPN network on the hub router. Which configuration required to establish a DMVPN tunnel with multiple spokes?

ip ospf network point-to-multipoint on both spoke routers

ip ospf network point-to-point on the hub router

ip ospf network point-to-multipoint on One spoke router

ip ospf network point-to-point on both spoke routers

Q305. Refer to the exhibit.

A network is under a cyberattack. A network engineer connected to R1 by SSH and enabled the terminal monitor via SSH session to find the source and destination of the attack. The session was flooded with messages, which made it impossible for the engineer to troubleshoot the issue. Which command resolves this issue on R1?

no terminal monitor

(config)#terminal no monitor

#terminal no monitor

(config)#no terminal monitor

To turn off terminal monitor, use “terminal no monitor” in the enable mode

Q306. Refer to the exhibit.

Which two commands provide the administrator with the information needed to resolve the issue? (Choose two.)

snmp user

debug snmp engine-id

debug snmpv3 engine-id

debug snmp packet

showsnmpv3 user

Q307. Refer to the exhibit.

Which subnet is redistributed from EIGRP to OSPF routing protocols?

10.2.2.0/24

10.1.4.0/24

10.1.2.0/24

10.2.3.0/26

Loading …

Cisco 300-410 exam is a challenging and comprehensive test that covers a wide range of topics. It is ideal for IT professionals who are interested in advancing their careers in enterprise networking and who want to demonstrate their knowledge and skills to potential employers or clients.

PDF (New 2023) Actual Cisco 300-410 Exam Questions: https://www.free4dump.com/300-410-braindumps-torrent.html