Free Dec-2022 500-220 Dumps are Available for Instant Access [Q25-Q43]

5/5 - (1 vote)

Free Dec-2022 500-220 Dumps are Available for Instant Access

View All 500-220 Actual Exam Questions Answers and Explanations for Free

NO.25 What are two roles of the network and device tags in a Dashboard? (Choose two.)

Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.

Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.

Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.

Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.

Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.

Reference:
Organization_Menu/Manage_Tags

NO.26 Refer to the exhibit.

The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?

Add a deny any/any firewall rule to the end of the firewall rules.

Remove the connection from Internet 1.

Physically disconnect all LAN ports.

Configure the MX appliance to Routed mode on the Addressing & VLANS page.

NO.27 Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

MS Switch

Meraki Insight

MR Access Point

MV Smart Camera

NO.28 Refer to the exhibit.

Which design recommendation should be considered?

A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.

A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.

A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

NO.29 When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)

Controller disconnection behavior

Captive Portal strength

Simultaneous logins

Firewall & traffic shaping

RADIUS for splash page settings

NO.30 Refer to the exhibit.

For an AP that displays this alert, which network access control method must be in use?

preshared key

WPA2-enterprise with my RADIUS server

splash page with my RADIUS server

MAC-based access control with RADIUS server

NO.31 Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.

NO.32 Which design requirement is met by implementing syslog versus SNMP?

when automation capabilities are needed

when proactive alerts for critical events must be generated

when organization-wide information must be collected

when information such as flows and client connectivity must be gathered

Reference:
Meraki_Device_Reporting_-_Syslog%2C_SNMP%2C_and_API

NO.33 Which Cisco Meraki best practice method preserves complete historical network event logs?

Configuring the preserved event number to maximize logging.

Configuring the preserved event period to unlimited.

Configuring a syslog server for the network.

Configuring Dashboard logging to preserve only certain event types.

NO.34 A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?

malware protection

SD-WAN

next-generation firewall

intrusion prevention

NO.35 What is a feature of distributed Layer 3 roaming?

An MX Security Appliance is not required as a concentrator.

An MX Security Appliance is required as a concentrator.

All wireless client traffic can be split-tunneled.

All wireless client traffic is tunneled.

Reference:
Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/
Wireless_Layer_3_Roaming_Best_Practices

NO.36 Refer to the exhibit.

What is the minimal Cisco Meraki Insight licensing requirement?

A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.

A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.

A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.

Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.

Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.

NO.37 Refer to the exhibit.

Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?

WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class.

WebEx traffic will prefer WAN 1 as it is the primary uplink.

WebEx traffic will prefer WAN 2 as long as it is up.

WebEx traffic will be load-balanced between both active WAN links.

NO.38 Refer to the exhibit.

Which IDS/IPS mode is the MX Security Appliance configured for?

quarantine

prevention

detection

blocking

NO.39 Refer to the exhibit.

What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?

1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.

100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.

100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.

1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.

NO.40 What is the role of the Meraki Dashboard as the service provider when using SAML for single sign-on to the Dashboard?

The Dashboard generates the SAML request.

The Dashboard provides user access credentials.

The Dashboard parses the SAML request and authenticates users.

The Dashboard generates the SAML response.

NO.41 A new application needs to be pushed to all iOS devices. Some devices report “NotNow” in the event log and do not install the application.
What does the “NotNow” event indicate?

The application requires the most recent iOS version.

The device is locked with a passcode.

The device cannot connect to Apple servers.

The device cannot connect to Cisco Meraki servers.

NO.42 Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)

intrusion prevention

site-to-site VPN

secondary uplinks

DHCP

high availability

Reference:
Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway

NO.43 Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)

Maximum Jitter

Total Bandwidth Usage

Maximum Latency

Per-flow Goodput

Application Response Time

Loading …

Cisco 500-220 Exam Syllabus Topics:

Topic	Details
Topic 1	Sentry for Meraki managed deployments Design scalable Meraki Auto VPN architectures
Topic 2	Design Enterprise wireless services Configuring MR wireless access points
Topic 3	Redundant networks and high availability Explain deployment consideration for the vMX
Topic 4	Explain organizational structure, segmentation and permissions Explain licensing, co-termination, and renewals
Topic 5	Application performance issues using Meraki Insight Describe how to use the dashboard API to monitor and maintain networks
Topic 6	SSIDs for Enterprise and BYOD deployments Cisco Meraki Cloud Management
Topic 7	Compare endpoint device and application management methods Design dynamic path selection policies
Topic 8	Alerts with Dashboard, SNMP, Syslog and Netflow in Dashboard Security threats using Security Center
Topic 9	Wireless client connectivity issues using Dashboard Network access control solutions
Topic 10	Threat protection and content filtering rules Explain access methods to dashboard and devices
Topic 11	Device enrollment such as supervised and device owner Interpret information from monitoring and reporting tools

The Most In-Demand 500-220 Pass Guaranteed Quiz : https://www.free4dump.com/500-220-braindumps-torrent.html

Cisco 500-220 Exam Syllabus Topics:

You may also like

Leave a Reply Cancel reply