Latest Jul-2022 1Y0-241 Dumps PDF And Certification Training [Q39-Q60]

Rate this post

Latest Jul-2022 1Y0-241 Dumps PDF And Certification Training

Check your preparation for Citrix 1Y0-241 On-Demand Exam

NO.39 Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith
“DIAMETER.NEW_REDIRECT(“aaa://host.example.com”)”
> add responder policy Redirect_Pol “diameter.req.avp(264).value.eq(“host1.example.net”)” Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?

Request originated from “host1.example.net” will be redirected to “host.example.com”.

Response originated from “host1.example.net” will be redirected to “host.example.com”.

Response originated from “host.example.net” will be redirected to “host1.example.com”.

Request originated from “host.example.net” will be redirected to “host1.example.com”.

NO.40 Scenario: A Citrix Administrator suspects an attack on a load-balancing vServer (IP address 192.168.100.25).
The administrator needs to restrict access to this vServer for 10 minutes.
Which Access Control List (ACL) will accomplish this?

add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600000

add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600

add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600000

add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600

NO.41 Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?

SSL profile

SSL multiplexing

SSL bridge

SSL policy

NO.42 Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith “DIAMETER.NEW_REDIRECT(“aaa://host.example.com”)”
> add responder policy Redirect_Pol “diameter.req.avp(264).value.eq(“host1.example.net”)” Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?

Request originated from “host1.example.net” will be redirected to “host.example.com”.

Response originated from “host1.example.net” will be redirected to “host.example.com”.

Response originated from “host.example.net” will be redirected to “host1.example.com”.

Request originated from “host.example.net” will be redirected to “host1.example.com”.

NO.43 A Citrix Administrator receives user complaints about latency while accessing an application that is load balanced on the Citrix ADC.
Which tool can the administrator use to gather information regarding response time, client network latency, and server-side processing time?

Citrix Application Delivery Management (ADM)

HDX Insight

WAN Insight

Security Insight

NO.44 Which step can a Citrix Administrator take to use default compression policies?

Select the compression algorithm (gzip/deflate/identity).

Disable the Citrix ADC compression feature at a global level.

Enable compression on the associated bound services.

Bind the default compression policies to the vServer.

NO.45 Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)

Bind the domain to the CS vServer instead of the GSLB vServer.

Configure CS policies that designate a load-balancing vServer as the target vServer.

Configure a CS vServer of target type GSLB.

Bind the GSLB domain to the GSLB vServer.

NO.46 Scenario: A Citrix Administrator executed the command below:
> set httpcallout httpcallout1 -cacheForSecs 120
This command changes the cache duration of the HTTP ____________ to be set to 120 seconds. (Choose the correct option to complete the sentence.)

callout response

request

callout request

response

NO.47 A Citrix Administrator needs to match the host name ‘www.example.com’ in all HTTP requests.
Which expression, when used, meets this requirement?

HTTP.REQ.HOSTNAME.EQ(“www.example.com”)

HTTP.RES.HOSTNAME.EQ(“www.example.com”)

HTTP.REQ.HOSTNAME(“example.com”)

HTTP.RES.HOSTNAME.CONTAINS(“www.example.com”)

NO.48 Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)

HTTP protocol for the services

SSL bridge protocol for the vServer

SSL bridge protocol for the services

SSL protocol for the services

HTTP protocol for the vServer

SSL protocol for the vServer

NO.49 Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?

set transform action “host change” -priority 10 -reqUrlFrom “https://vpn.citrix.com/*” -reqUrlInto
“https://server1.citrix.com/*” -resUrlFrom “https://server1.citrix.com/*” -resUrlInto “https://vpn.citrix.com/*”

set transform action “host change” -priority 10 -reqUrlFrom “https://server1.citrix.com/*” -reqUrlInto
“https://vpn.citrix.com/*” -resUrlFrom “https://server1.citrix.com/*” -resUrlInto “https://vpn.citrix.com/*”

set transform action “host change” -priority 10 -reqUrlFrom “https://server1.citrix.com/*” -reqUrlInto
“https://vpn.citrix.com/*” -resUrlFrom “https://vpn.citrix.com/*” -resUrlInto “https://server1.citrix.com/*”

set transform action “host change” -priority 10 -reqUrlFrom “https://vpn.citrix.com/*” -reqUrlInto
“https://server1.citrix.com/*” -resUrlFrom “https://vpn.citrix.com/*” -resUrlInto “https://server1.citrix.com/*”

NO.50 Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?

Turn off the appliance using the power button.

Use the reset button on the front of the appliance.

Use the NMI button on the back of the appliance.

Connect to a USB port to issue a restart command.

NO.51 Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)

DNS

Integrated caching

SSL

System

NO.52 A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?

Add a second interface to each Citrix ADC VPX instance.

Configure a failover interface set on each Citrix ADC VPX instance.

Configure LACP on the SDX for the data interface.

Configure LACP on the SDX for management interface.

NO.53 Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packetforwarding function based on the route table lookups?

MBF

USIP

Layer 2

Layer 3

NO.54 Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current active directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?

A command policy to the group

A nested group to the new group

Users to the group on the Citrix ADC

An authentication, authorization, and auditing (AAA) action to the group

NO.55 Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:
> add policy dataset Admin_group ipv4
> bind policy dataset Admin_group 192.168.149.10 -index 11
> bind policy dataset Admin_group 192.168.149.39 -index 12
> bind policy Admin_group 192.168.149.49 -index 13
> add responder policy POL_1
“!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(“Admin_group”))”
RESET
> bind lb vServer lb_vsrv_www -policyName POL_1 -priority 100 -gotoPriorityExpression END -type REQUEST What will be the effect of these commands?

Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www.

Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www.

Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www.

All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.

NO.56 When a Citrix ADC high availability (HA) pair failover occurs, by what method does the Citrix ADC communicate to the network switches and routers that IP-to-MAC address bindings have changed?

Reverse ARP (RARP) to update the network devices

MAC-based forwarding (MBF) to update the routers

Proxy ARP to update the network devices

Gratuitous ARPs (GARPs) to update the network devices

NO.57 What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?

A private key

A certificate revocation list (CRL)

A certificate signing request (CSR)

A certificate key-pair

NO.58 A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?

CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)

CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)

CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)

CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)

NO.59 Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
‘Unknown’.
What is causing the secondary state to be ‘Unknown’?

The synchronization on the secondary appliance is disabled.

TCP port 22 is disabled between the primary and secondary ADCs.

The administrator made both Citrix ADCs primary.

The remote procedure call (RPC) nodes are incorrectly configured.

NO.60 Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) – HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?