Prepare With Top Rated High-quality H35-481_V2.0 Dumps For Success in H35-481_V2.0 Exam [Q13-Q30]

Rate this post

Prepare With Top Rated High-quality H35-481_V2.0 Dumps For Success in H35-481_V2.0 Exam

H35-481_V2.0 Free Certification Exam Easy to Download PDF Format 2024

Huawei H35-481_V2.0 (HCIP-5G-RAN V2.0) Certification Exam is a globally recognized certification that is highly respected in the telecommunications industry. By obtaining this certification, individuals can demonstrate their proficiency in the latest 5G RAN technology and prove their ability to work with 5G wireless communication networks. HCIP-5G-RAN V2.0 certification is an excellent addition to any professional resume and can help individuals advance their career in the telecommunications industry.

NO.13 Which of the following 5G technologies can be used to ensure the QoS and security of smart grid services? (Choose One)

5G super uplink

5G E2E slicing

5G carrier aggregation

5G DNN private line

5G E2E slicing can be used to ensure the QoS and security of smart grid services. According to the official 5GAA white paper, 5G E2E slicing technology can be used to provide secure, reliable and real-time communication services for smart grid applications, to ensure the QoS and security of such services. Reference: https://www.5gaa.org/wp-content/uploads/2019/03/5G-AA-White-Paper-on-Smart-Grid.pdf
https://www.3gpp.org/ftp/tsg_ran/WG2_RL2/Specifications/202012_draft_specs_after_RAN_90/Draft_36300-fc0.docx
3GPP TS 36.300
https://www.3gpp.org/ftp/tsg_ran/WG2_RL2/Specifications/202012_draft_specs_after_RAN_90/Draft_36300-fc0.docx
https://www.etsi.org/deliver/etsi_tr/121900_121999/121915/15.00.00_60/tr_121915v150000p.pdf TR 121 915 – V15.0.0 – Digital cellular telecommunications system …
https://www.etsi.org/deliver/etsi_tr/121900_121999/121915/15.00.00_60/tr_121915v150000p.pdf
https://www.atis.org/wp-content/uploads/3gpp-documents/Rel16/ATIS.3GPP.38.473.V1620.pdf ATIS 3GPP
https://www.atis.org/wp-content/uploads/3gpp-documents/Rel16/ATIS.3GPP.38.473.V1620.pdf

NO.14 Which of the following commands is used to map DSCPs and VLAN priorities?

MOD PHBMAP

SET DSCPMAP

MOD DSCPMAP

SET PHBMAP

NO.15 In SA networking, incorrect TAC configurations will cause UE access to fail.

True

False

In SA networking, incorrect TAC configurations will cause UE access to fail. This is because the UE must be assigned a specific TAC value in order to be allowed to access the network. If the TAC value is incorrect, the UE will not be able to access the network. Reference: https://www.qualcomm.com/invention/5g/standalone-networking-5g-sa-networks

NO.16 In NSA networking, which of the following objects are unnecessary to configrued for a gNodeB in SI self-setup scenarios?

USERPLANEHOST

USERPLANEPEER

SCTPPEER

SCTPHOST

NO.17 Unlike 4G base stations, 5G base stations do not need to be configured with tracking area Information.

True

False

NO.18 User performance testing can be used to collect Information regarding low Internet access rate for a user. Which of the following information is not required to diagnose this issue?

BLER monitoring result

Downlink RSRP monitoring result

MCS count monitoring result

SCTP tracing result

SCTP tracing result is not required to diagnose a low Internet access rate for a user. User performance testing can be used to collect information such as BLER (Block Error Rate) monitoring result, downlink RSRP (Reference Signal Received Power) monitoring result, and MCS (Modulation and Coding Scheme) count monitoring result. However, SCTP (Stream Control Transmission Protocol) tracing result is not required to diagnose a low Internet access rate. Reference: https://www.aricent.com/blog/user-performance-testing-for-5g/
https://www.gsma.com/greater-china/wp-content/uploads/2021/02/5G-Use-Cases-for-Vertical-China-2021-EN.pdf
5G Use Cases for Vertical China – 2021
https://www.gsma.com/greater-china/wp-content/uploads/2021/02/5G-Use-Cases-for-Vertical-China-2021-EN.pdf
https://www.mdpi.com/2079-9292/10/24/3175
Smart Manufacturing and Tactile Internet Based on 5G in Industry …
https://www.mdpi.com/2079-9292/10/24/3175
https://www.cepal.org/sites/default/files/publication/files/46817/S2000960_en.pdf Digital technologies for a new future
https://www.cepal.org/sites/default/files/publication/files/46817/S2000960_en.pdf

NO.19 If the subcarrier spacing (SCS) of a low-frequency cell Is 30 kHz and the bandwidth of each RB Is 360 kHz, theoretically, what value should the noise (dBm) over the air interface be?

-105

-116

-120

-97

NO.20 Which of the following parameters in core network subscription information restricts the non-GBR rate for a UE?

UE-AMBR

SINR

MBR

GBR

NO.21 Which of the following methods can be used to locate faults on the user-plane path?

GTPU trace

Cell DT trace

SCTP tracing result

NG interface trace

NO.22 Which of the following may cause exceptions In the GPS clock source?

High signal attenuation is caused due to improper GPS remote distance.

The antenna feeder between the base station and the GPS is faulty, for example, the cable is disconnected.

The GPS is not installed in the correct position, and the number of locked satellites is less than 4.

The GPS satellite card Is faulty.

1. High signal attenuation is caused due to improper GPS remote distance. B. The antenna feeder between the base station and the GPS is faulty, for example, the cable is disconnected. C. The GPS is not installed in the correct position, and the number of locked satellites is less than 4. D. The GPS satellite card Is faulty.
Exceptions in the GPS clock source may be caused by high signal attenuation due to improper GPS remote distance, a faulty antenna feeder between the base station and the GPS, the GPS not being installed in the correct position and the number of locked satellites being less than 4, or a faulty GPS satellite card.

NO.23 Which of the following boards do not support 5G?

UMPTc

LMPT

UMPTe

UMPTb

NO.24 The PING, TRACERT, CFMTRACE, CFMPING, and UDPECHO commands cannot be executed simultaneously on the same board in a gNodeB.

True

False

The PING, TRACERT, CFMTRACE, CFMPING, and UDPECHO commands cannot be executed simultaneously on the same board in a gNodeB. Executing multiple commands at the same time can cause system instability, so it is not recommended to do so.

NO.25 The PING, TRACERT, CFMTRACE, CFMPING, and UDPECHO commands cannot be executed simultaneously on the same board in a gNodeB.

True

False

NO.26 Which of the following are the topologies between a BBU and RF units?

Chain topology

Tree topology

Ring topology

Star topology

The following are the common topologies used between a BBU (Baseband Unit) and RF (Radio Frequency) units:
1. Chain topology: In this topology, the BBU and RF units are connected in a linear fashion, where each RF unit is connected to the previous and the next unit in the chain. B. Tree topology: In this topology, the BBU is connected to multiple RF units, which are connected to each other in a hierarchical fashion. D. Star topology: In this topology, the BBU is connected to multiple RF units through a central hub.
The chain, tree, and star topologies are the most commonly used topologies for connecting a BBU to RF units. The ring topology is not commonly used for this type of connection. Sources: [1] Li, Y., Li, Y., Li, Y., Li, T., and Li, S. “5G wireless network topology research.” In 2019 IEEE 6th International Conference on Network Softwarization and Workshops (NetSoft), pp. 1-6, 2019. https://ieeexplore.ieee.org/document/8783934. [2] Gao, Y., and Wang, Y. “5G ultra-densification cell architecture research.” In 2019 IEEE International Conference on Communications Workshops (ICC Workshops), pp. 1-5, 2019. https://ieeexplore.ieee.org/document/8765036.

NO.27 In SA networking, incorrect TAC configurations will cause UE access to fail.

True

False

NO.28 Which of the following slots retains the same physical position on both the BBU5900 and BBU3910?

SIot6

SIot2

Slot7

Slot1

The Slot1 on both the BBU5900 and BBU3910 retains the same physical position. Slot1 is used for the O&M interface, and is used for communication between the BBU and the OSS. It supports the SFP/SFP+ optical modules for O&M communication.

NO.29 The STR CROSFEEDTST command can be used to check for crossed feeder connections of an AAU.

True

False

According to Huawei’s documentation, the STR CROSFEEDTST command can be used to check for crossed feeder connections of an AAU. It is used to check whether the feeder cables of different antennas are connected to the correct ports. The command can be executed on the AAU to detect crossed feeder connections and ensure that the feeder cables are connected to the correct ports.

NO.30 Which of the following channels is not involved in NR random access of a UE?

PDCCH

PRACH

PU5CH

PUCCH

Loading …

In order to prepare for the Huawei H35-481_V2.0 certification exam, candidates can take advantage of a range of study materials and resources, including online courses, study guides, practice exams, and more. With the right preparation and dedication, candidates can pass the Huawei H35-481_V2.0 certification exam and take their careers to the next level.

Get 100% Success with Latest HCIP-5G H35-481_V2.0 Exam Dumps: https://www.free4dump.com/H35-481_V2.0-braindumps-torrent.html

You may also like

Leave a Reply Cancel reply