Get New 2023 Valid Practice To your 300-515 Exam (Updated 87 Questions) [Q20-Q41]

Rate this post

Get New 2023 Valid Practice To your 300-515 Exam (Updated 87 Questions)

CCNP Service Provider 300-515 Exam Practice Test Questions Dumps Bundle!

Cisco 300-515 certification exam is designed for professionals who want to demonstrate their expertise in implementing Cisco Service Provider VPN Services. 300-515 exam tests the candidate’s knowledge and skills related to the implementation of VPN technologies, such as MPLS Layer 3 VPNs, MPLS Layer 2 VPNs, and Ethernet VPNs. 300-515 exam also covers topics related to the configuration and troubleshooting of these technologies in a service provider environment.

How to book the Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam

Typically, up to six weeks in advance and as late as the same day, you can schedule an exam. You have to follow these steps in order to participate for the Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam:

Step 1: Visit Pearson VUE website by clicking here
Step 3: Login or create an account
Step 3: Enter the exam number i.e. 300-515
Step 3: Follow the details on the website
Step 4: Pay for your exam via credit card or exam vouchers

Q20. Refer to the exhibit.

A customer carrier running MPLS VPN wants to utilize a backbone carrier to forward traffic and exchange VPNv4 prefixes between the two customer carrier networks depicted. Which two sets of routers must establish MP-iBGP sessions? (Choose two.)

BB-PE-A and CC-PE-B

CC-PE-A and CC-PE-B

BB-PE-A and BB-PE-B

CC-PE-A and BB-PE-A

BB-PE-A and BB-P-A

CC-PE-A and CC-P-A

Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_ias_and_csc/configuration/12-2sx/mp-ias- and-csc-12-2sx-book/mp-carrier-bgp.html

Q21. The CTO of a company requires the support of a network consultant to deliver an MPLS solution without resigning to a certain degree of redundancy and scalability. Which solution effectively scales to hundreds or thousands of sites?

L2VPN with the broadcast traffic processed at the ingress PE.

L3VPN with direct LSP connectivity between all PEs.

L2VPN by encapsulating multiple frame formats with interworking.

L3VPN using a hierarchical topology of N-PEs and U-PEs.

Section: VPN Architecture

Q22. Refer to the exhibit.

An organization is running H-VPLS on a network comprising four routers in a hub-and-spoke topology with R1 as the hub An engineer added a new spoke with multiple VCs to the network, and now traffic cannot flow properly How should the engineer update the configuration on R1 to correct the problem?

Disable spanning tree to allow loops to occur within the hub-and-spoke topology.

Disable split horizon to allow multiple VCs per spoke

Disable Cisco Discovery Protocol to allow MPLS to share labels between the designated spokes

Disable Cisco Discovery Protocol to allow for neighbor discovery

Q23. You are troubleshooting ARP connectivity issues for an Ethernet interface on an IOS XR network that runs IS-IS. You verify that the IGP protocol is running, but an ARP entry has not yet been created.
Which action should you take?

debug ping packets

debug ARP

ping the connected neighbor

verify the RIB table routes

Section: VPN Architecture

Q24. Which tool identifies the point of failure in a P2MP LSP from the ingress LSR?

Jitter TLV

SPAN

P2MP traceroute

P2MP ping

Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/mpls/configuration/ guide/b-mpls-cg53x-asr9k/b-mpls-cg53x-asr9k_chapter_01000.html

Q25. An engineer is investigating an issue. Which command should an engineer use on a Cisco IOS XE device to display the contents of the LFIB?

show mpls forwarding-table

show mpls ldp neighbors

show mpls ldp labels

show mpls ldp bindings

Q26. You are writing the requirements for an MPLS L3VPN environment that uses MP-BGP between PE routers.
In this environment, route targets and route distinguishers need to be advertised between the PE routers.
Which three operations meet these requirements? (Choose three.)

mandatory creation of PE-to-PE BGP sessions between the outgoing interface IP addresses

advertisement of standard communities, enabled on the PE-to-PE BGP neighbors

creation of PE-to-PE BGP sessions between loopback IP addresses

full mesh of IBGP sessions

full mesh of EBGP sessions and partial mesh of IBGP sessions

advertisement of extended communities, enabled on the PE-to-PE BGP neighbors

Section: Layer 3 VPNs

Q27. Refer to the exhibit.

An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the midpoint router and the tailend router in this P2MP TE network implementation?

headend

source

transit

bud

Explanation
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-te-path-setup- xe-3s-asr920-book/mp-te-path-setup-xe-3s-asr920-book_chapter_01.html

Q28. When implementing Layer 3 MPLS VPNs on Cisco IOS/IOS XE PE routers, which PE-to-CE routing protocol requires a separate routing process to be created for each VRF?

EIGRP

RIPv2

OSPF

BGP

Q29. Drag and drop the EVPN components from the left onto the correct planes on the right.

Reference:
https://www.cisco.com/c/dam/m/en_us/network-intelligence/service-provider/digital-transformation/knowledge-network-webinars/pdfs/0420-epn-ckn.pdf

Q30. You are troubleshooting ARP connectivity issues for an Ethernet interface on an IOS XR network that runs IS- IS. You verify that the IGP protocol is running, but an ARP entry has not yet been created.
Which action should you take?

debug ping packets

debug ARP

ping the connected neighbor

verify the RIB table routes

Q31. Which mechanism reduces the network flooding caused by host ARP learning behavior?

ARP suppression

storm control

root guard

BPDU guard

Reference:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/white- paper-c11-735015.html

Q32. Refer to the exhibit.

What is shown in this output?

local and outgoing abels are updated in hardware

BGP is used between neighbors that are exchanging MPLS labels

LDP neighbor statuses

the labels received and advertised on PE1

Q33. Which is the primary function of a MPLS L3 VPN route target?

It imports and exports identified routes into selected VRFs.

It uniquely identifies NLRIs that have the same numeric value.

It imports the external routes it identifies into VRFs that support Internet traffic

It supports QoS by classifying traffic by file type when it applies MPLS EXP bits to each packet.

Q34. An ISP provides a major client MPLS VPN for managed services. The MPLS engineering team needs to use the advanced VPN feature of selective VRF import so that only specific prefixes are present in the required VPNs.
Which aspect of this feature must the team consider?

A route must pass the import route map first and then the route target import filter.

The routers that are imported in the VRF can be BGP and IGP routes, so other match conditions in the route map, besides communities, can be used.

The import-map command is applied under the PE interface that connects to the CE router.

A route is imported into the VRF only when at least one RT that is attached to the route matches one RT that is configured in the VRF and the route is permitted by the import route map.

Section: VPN Architecture
Explanation/Reference: https://www.ccexpert.us/mpls/configuring-selective-vrf-import.html

Q35. While implementing Layer 3 MPLS VPN, which feature should an engineer use at the PEs to transform the customer IPv4 prefixes into a unique 96-bit prefix?

VC ID

PW ID

Section: Layer 3 VPNs
Explanation/Reference:

Q36. Which utility can you use to validate an LSP in an MPLS environment?

uRPF

MPLS LSP ping

logging

RSVP

Q37. Which statement describes the no bgp default route-target filter

Prefixes that are received with route targets and distinguisher are accepted.

Prefixes that are received with route targets and distinguisher are not accepted.

Prefixes that are received with route targets that are not imported at the PE are not accepted.

Prefixes that are received with route targets that are not imported at the PE are accepted.

Q38. Refer to the exhibit.

An engineer has configured router 1 to provide shared services to clients behind router 2. To complete the implementation so that routes from router 1 are accepted, what must the engineer configure on router 2?

with import route targets 101:102 and 202:201

with import route targets 201:202 and 401:402

with export route targets 301:202 and 101:102

with export route targets 201:202 and 401:402

Q39. Which optional information can be included with an IPv6 ping to support the troubleshooting process?

IPv4 IP address

source MAC address

destination MAC address

IPv6 hostname

Section: IPv6 VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ ip6-mng-apps.html

Q40. An engineer is troubleshooting an EoMPLS circuit on a Cisco IOS XR router interface that removes a VLAN

interface GigabitEthernet 0/10.l2transport
encapsulation dot1q 10
rewrite ingress tag pop 1 symmetric
l2vpn
xconnect group 103588
p2p 103588
interface GigabitEthernet 0/10.10
neighbor ipv4 10.10.10.2 pw-id 103588

interface GigabitEthernet 0/10.10
encapsulation dot1q 10
rewrite ingress tag pop 1 symmetric
l2vpn
xconnect group 103588
p2p 103588
interface GigabitEthernet 0/10.10
neighbor ipv4 10.10.10.2 pw-id 103588

interface GigabitEthernet 0/10.10 l2transport
encapsulation dot1q 10
l2vpn
xconnect group 103588
p2p 103588
interface GigabitEthernet 2/10.10
neighbor ipv4 10.10.10.2 pw-id 103588

interface GigabitEthernet 0/10.10 l2transport
encapsulation dot1q 10
rewrite ingress tag translate 1-to-1 dot1ad 10
symmetric
l2vpn
xconnect group 103588
p2p 103588
interface GigabitEthernet 0/10.10
neighbor ipv4 10.10.10.2 pw-id 103588

Q41. DRAG DROP

Refer to the exhibit. Drag and drop the EVC configuration items from the left onto the correct descriptions on the right.
Select and Place:

Section: Layer 2 VPNs

Loading …

Cisco 300-515 exam is designed to test the knowledge and skills of professionals who are involved in implementing and maintaining VPN services in a service provider network. 300-515 exam is part of the Cisco Certified Specialist – Service Provider VPN Services Implementation certification, which is intended for individuals who are interested in advancing their career in the field of service provider networking.

Fully Updated Dumps PDF – Latest 300-515 Exam Questions and Answers: https://www.free4dump.com/300-515-braindumps-torrent.html