C-TS411-2022 Training & Certification Get Latest SAP Certified Application Associate Updated on Dec 13, 2023 [Q46-Q67]

Rate this post

C-TS411-2022 Training & Certification Get Latest SAP Certified Application Associate Updated on Dec 13, 2023

Certification Training for C-TS411-2022 Exam Dumps Test Engine

QUESTION 46
What do you have to keep in mind when copying a group BOM to a plant specific BOM?Note: There are
2 correct Answers to this question.

The internal BOM number stays unchanged.

The material component must have a plant assignment.

The header status has to be active.

The BOM usage can be changed.

QUESTION 47
A procedure sets the value V2 for characteristic C2 when the value V1 is set for characteristic C1.How do you assign and define this procedure?Note: There are 3 correct Answers to this question.

Procedure to characteristic C1 using the following syntax: $self.C2 = ‘V2’ if $self.C1 = ‘V1’ (not recommended)

Procedure to characteristic C2 using the following syntax: $self.C1 = ‘V1’ if $self.C2 = ‘V2’ (not recommended)

Procedure with the following syntax to the configuration profile: $self.C2 = ‘V2’ if $self.C1 = ‘V1’ (recommended)

Procedure to the value V2 with the following syntax: $self.C1 = ‘V1’ (not recommended)

Procedure to the value V1 with the following syntax: $self.C2 = ‘V2’ (not recommended)

QUESTION 48
You can assign object dependencies to different master data.Which assignments have no effect in variant configuration and only affect classification?

Assignment to Classes

Assignment to Characteristic Values

Assignment to Configuration Profiles

Assignment to Characteristics

QUESTION 49
Which type of object dependencies must contain $self, $parent, or $root at least once?

Procedures

All types of object dependencies

Pre- and Selection Conditions

Constraints

QUESTION 50
What is the significance of the control key?Note: There are 3 correct Answers to this question.

It is a value that can be used as a default value in the routing.

It is an optional field in the Work Center.

It is a value that can be copied to the routing as a reference.

It defines the usage of Work Centers in routings.

It is a mandatory field in the Work Center.

QUESTION 51
Which configuration processes/scenarios are supported for both processing modes?

Plan./Production Order, Sales Order (SET) only

Plan./Production Order, Order BOM, Sales Order (SET)

Sales Order (SET), Order BOM only

Plan./Production Order, Order BOM only

QUESTION 52
You assigned a released characteristic to a class. What happens when you change the characteristic status to locked?Note: There are 2 correct Answers to this question.

This has no effect on the assigned classes or objects.

You can no longer assign this characteristic to other classes.

The characteristic is invisible in classes and objects.

You cannot change the status as the characteristic is assigned.

QUESTION 53
What happens to the group BOM when you do a plant assignment?

The internal number and the BOM usage becomes new.

The internal number stays unchanged and the BOM usage becomes new.

The internal number becomes new and the BOM usage stays unchanged.

The internal number and the BOM usage stays unchanged.

QUESTION 54
How can you restrict the search result?Note: There are 2 correct Answers to this question.

Filters

Change number

Validity

Reselect

QUESTION 55
You work with a Plan./Production Order without BOM explosion scenario.Which information is available?Note: There are 2 correct Answers to this question.

In the sales order, no information about the BOM is displayed except the routing.

In the simulation, no information about the BOM is displayed except the routing.

In the simulation, information about the BOM and routing is displayed.

In the sales order, no information about the BOM and routing is displayed.

QUESTION 56
Which scenarios are possible when you upload files to a Product Master?Note: There are 2 correct Answers to this question.

You can easily attach a Document Info Record.

You cannot attach a Document Info Record.

You can easily upload a file without selecting a Workstation Application and a Content Server.

You can easily upload a file, select a Workstation Application and a Content Server.

QUESTION 57
Which configuration process/scenario prevents the display of a BOM explosion in the sales order?
Note: There are 2 correct Answers to this question.

Sales Order (SET) for both processing modes

Order BOM with processing mode AVC

Order BOM with processing mode classic and standard settings

Planned/Production Order without BOM explosion for both processing modes

QUESTION 58
Which are the settings for material variant determination that are also made in customizing for the item categories for the sales document?Note: There are 3 correct Answers to this question.

Set actions for material variants

Setting BOM determination (link or individual)

Activate the variant matching

Availability check/ATP material variant

Setting routing determination (link or individual)

QUESTION 59
Which special feature must be taken into account for the material master of material variants for use in logistics?

The material master requires a link to the configurable material at sales area level.

The material master at client level requires the indicator that it can be configured.

The material master requires a connection to the configurable material at client level.

The material master requires a link to the configurable material at plant level.

QUESTION 60
Which material types are used for configurable material masters?Note: There are 2 correct Answers to this question.

Material type KMAT – configurable materials can only be created with this material type.

Material types KMAT, HALB, and FERT – configurable materials can only be created with these material types.

Each material type can be used in standard customizing for configurable material masters.

Material type KMAT – each material master of this material type can be configured in a fixed way.

QUESTION 61
You define a Product Master from scratch and a pop-up becomes visible. Which data do you have to enter?Note: There are 2 correct Answers to this question.

Description

Industry Sector

Product Type

Organizational Level

QUESTION 62
You work with cross-plant and plant-specific Product Master statuses. Which status has the highest priority?

The cross-plant status.

The most restrictive status.

The plant-plant specific status.

The least restrictive status.

QUESTION 63
What is the easiest way to check whether a model is consistent with regard to the processing mode of the configuration profile and object dependencies?

You use the Check Model function in the (VC modeling Environment PMEVC).

You use the Extras function in the material configuration (Simul./ModelingCheck Model CU50).

You use the function Inconsistent VC Models in the app Variant Configuration Overview.

You use the Check Model function in the Simulate Configuration Models app.

QUESTION 64
You create a new characteristic with numeric values and you only set a single value assignment. You add one interval inside value tab. What does it mean for classification?

The user can set values which don’t belong to the interval.

The user can select an interval inside classification.

The user can select one value of the interval inside classification.

The user can select several values out of the interval inside classification.

QUESTION 65
What would be the purpose of classifying Work Centers?

Classification inside a Work Center sets the default value for a routing.

Work Centers cannot be classified in the standard system.

Classification inside a Work Center makes it possible to find it for a routing.

Work Centers must always be classified in the standard system.

QUESTION 66
To which object of a Task List can you directly assign production resources/tools?

Material assignments

Operations

Sequences

Headers

QUESTION 67
You use the app Find in Classes. The result screen only shows the object ID and type. What can you do to make characteristic values inside the result screen visible?Note: There are 2 correct Answers to this question.

Change the layout inside the result screen.

Change the layout inside an object.

Change the layout inside the class.

Change the layout inside the class type.