2023 Latest 5V0-31.22 dumps – Instant Download PDF [Q20-Q39]

Rate this post

2023 Latest 5V0-31.22 dumps – Instant Download PDF

Updated Verified 5V0-31.22 Downloadable Printable Exam Dumps

Q20. What is a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment?

1 Add a new vSAN license to the SDDC Manager and vCenter Server.
2. Reassign the vSAN license to the cluster in the vCenter Server.
3. Remove the expired vSAN license from the SDDC Manager and vCenter Server.

1 Add a new vSAN license to the SDDC Manager.
2. Connect to SDDC Manager via SSH, and then restart Domain Manager using systemctl restart domainmanager. 3 Verify in the SDDC Manager whether a new vSAN license has been assigned to the cluster.

1 Add a new vSAN license to the vCenter Server.
2. Connect to SDDC Manager via SSH, and then restart Lifecycle Management using systemctl restart Icm.
3. Verify in the vCenter Server whether a new vSAN license has been assigned to the cluster.

1 Add a new vSAN license to the SDDC Manager.
2. Reassign the vSAN license to the cluster in the SDDC Manager.
3. Remove the expired vSAN license from the SDDC Manager

Q21. Which service is integrated with VMware Cloud Foundation and enables a centralized and simplified lifecycle management of ESXi host?

vRealize Suite Lifecycle Manager

vSphere Lifecycle Manager

Solutions Manager

vCenter Lifecycle Manager

Q22. An architect is designing networking for a developer-ready infrastructure on VMware Cloud Foundation.
During the discussion with the network team, a question comes up about the use of a routable CIDR range.
Which item uses this type of range?

ClusterIP

vSphere Pod

Ingress

Kubernetes services

Q23. An administrator has registered an external identity source in a consolidated architecture and would like to make sure that any subsequent workload domains can be accessed using the same identity sources.
How can this goal be achieved with VMware Cloud Foundation?

By configuring IWA as an identity source

By configuring LDAPS as an identity source

By keeping the pre-configured defaults

By replicating vSphere SSO configuration

Q24. Which two configuration steps must a VMware Cloud Foundation administrator apply to achieve north/south connectivity while setting up an edge VM node for a workload domain from the SDDC Manager user interface? (Choose two.)

ToR Switches VRFs

OSPF Configuration

BGP Configuration

vSphere VDS Uplinks

NSX VDS Uplinks

Q25. An administrator needs additional capacity on a vSAN cluster. Each host currently has only one disk group.
Which two approaches can be used to expand storage capacity in this situation? (Choose two.)

Increase the number of cache disks in the existing disk group.

Add an additional disk group.

Disable compression.

Increase the number of capacity disks in the existing disk group

Disable deduplication.

Q26. A developer is deploying pods with Persistent Volumes (PV) on vSphere with Tanzu. Which component determines the datastore that the PV will be placed on?

CNS-CSI

Hostd

Spherelet

SPBM

Q27. An administrator is tasked with changing the password of the SDDC Manager super user account in a newly installed VCF environment.
Which method must the administrator use to complete this task?

1 Log in to SDDC manager Ul as a user with the ADMIN role.
2. Go to Administration > Security > Password Management.
3. Select the SDDC Manager account from the component drop-down menu.
4. Click Rotate Now button.

1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user
3. Enter the passwd admin command.
4. Enter and retype the new password.

1 Log in to the SDDC manager Ul as a user with the ADMIN role
2. Go to Developer Center > API Explorer
3. Expand APIs for managing users.
4. Update password for root user.

1 SSH in to the SDDC Manager VM using the vcf user account.
2. Switch to the root user.
3. Enter the passwd vcf command.
4. Enter and retype the new password.

Q28. A systems administrator is tasked to deploy a management domain during VMware Cloud Foundation Bring-Up process. What are the minimum hardware requirements for the management cluster?

2 vSAN Ready Nodes, 192 GB RAM per server, and 4 10GbE NICs

8 vSAN Ready Nodes, 256 GB RAM per server, and 2 10GbE NICs

4 vSAN Ready Nodes, 192 GB RAM per server, and 2 10GbE NICs

6 vSAN Ready Nodes, 256 GB RAM per server, and 4 10GbE NICs

Q29. An administrator wants to delete a VMware Cloud Foundation Workload Domain and re-use the attached ESXi hosts by returning them to the list of unassigned hosts in the SDDC Manager inventory.
Which action needs to be taken to complete this task?

ESXi hosts need to be re-imaged and updated.

ESXi hosts need to be decommissioned and re-imaged.

ESXi hosts need to be re-imaged and rejoined.

ESXi hosts need to be decommissioned and updated

Q30. What is a supported function of the vSphere Lifecycle Manager (LCM) in VMware Cloud Foundation (VCF)?

Upgrade vCenter Server

Upgrade SDDC Manager

Downgrade VM hardware version

Check hardware compatibility of hosts and clusters

Q31. An administrator is tasked with deploying a new VI Workload Domain into an existing VMware Cloud Foundation environment. Which three initial shared storage types are supported? (Choose three.)

vSAN

NFSv3

SMB 3.0

vVols

VMFS on iSCSI

NFSV4.1

Q32. A VMware architect has been asked to design a VMware Cloud Foundation solution for an online gaming company. The Chief Information Officer (CIO) of the company has asked the architect to focus on these requirements:
* The environment should be optimized for maximum hardware utilization.
* The environment should be highly available.
Which method meets these requirements and is supported for vCenter Server with VMware Cloud Foundation?

Storage level snapshots

vSphere HA

vSphere FT

vCenter HA

Q33. A VMware Cloud Foundation administrator is required to enable Workload Management (vSphere with Tanzu) on an existing workload domain cluster, which is currently licensed with a vSphere Enterprise Plus license.
Which action, if any, is required to complete this task?

Add a license for vSphere with Tanzu with sufficient CPU capacity to the SDDC Manager inventory, and then assign the license to the cluster in SDDC Manager

No action is required since SDDC Manager licenses include an entitlement for vSphere with Tanzu.

No action is required since the vSphere Enterprise Plus license supports vSphere with Tanzu.

Add a license for vSphere with Tanzu with sufficient CPU capacity to both the SDDC Manager and vCenter Server, and then assign the license to the cluster in vCenter Server

Q34. Which two functionalities does a NSX Tier-0 Gateway provide to a vSphere with Tanzu deployment? (Choose two.)

Gateway for Segments

Layer 2 Switching

Connectivity to all Tier-1 Gateways

Downlink Connections to Segments

Connectivity to physical networks and routers

Q35. Which two options are only available when using vSphere Lifecycle Manager Images? (Choose two.)

Upgrade VM Hardware Compatibility versions.

Update the firmware of all ESXi hosts in a cluster.

Install and update third-party software on all ESXi hosts in a cluster.

Check the hosts and clusters against the vSAN Hardware Compatibility List.

Upgrade and patch ESXi hosts.

Q36. Which two roles are played by a Spherelet in a Tanzu-enabled VCF workload domain? (Choose two.)

It runs as a VIB on all Supervisor Cluster ESXi hosts configured with the vSphere Networking Stack.

It enables an ESXi hypervisor to act as a Kubernetes master node.

It enables an ESXi hypervisor to act as a Kubernetes worker node.

It starts and monitors vSphere pods running on the workload domain cluster

It communicates with the vSphere with Tanzu embedded Harbor registry.

Q37. Which two use cases would require the creation of multiple clusters in a workload domain? (Choose two.)

Different application licensing models

Different host CPU types

Different virtual machine workload types

Different memory requirements

Bare-Metal vs. virtual workloads

Q38. Which component is upgraded when using the SDDC Manager management domain upgrade workflow in VMware Cloud Foundation?

VMware Cloud Builder

VMware vRealize Network Insight

Workload Domain vCenter Server

VMware NSX-T Manager nodes

Q39. Which two roles are provided by a local NSX Manager appliance? (Choose two.)

Compliance

Policy

Controller

Orchestrator

Authorization

VMware 5V0-31.22 exam is a challenging exam that requires candidates to have a strong understanding of virtualization and cloud computing. 5V0-31.22 exam is designed to test the candidates’ ability to deploy and manage VMware Cloud Foundation environments in a variety of settings, including on-premises, in the cloud, or in a hybrid environment. Candidates who pass the exam will be able to demonstrate their skills and knowledge in deploying and managing VMware Cloud Foundation environments, which will help them advance their careers in the IT industry.

VMware Cloud Foundation Specialist (v2) certification exam tests candidates on their ability to deploy and manage the VMware Cloud Foundation environment. It covers topics such as planning and designing a VMware Cloud Foundation environment, deploying and configuring the SDDC Manager, setting up and configuring vSphere, setting up and configuring vSAN, setting up and configuring NSX-T, and managing the VMware Cloud Foundation environment. Passing 5V0-31.22 exam validates the skills required to implement and manage a complete VMware Cloud Foundation environment, making it a valuable certification for IT professionals looking to advance their careers in cloud computing.

The Ultimate VMware 5V0-31.22 Dumps PDF Review: https://www.free4dump.com/5V0-31.22-braindumps-torrent.html

You may also like

Leave a Reply Cancel reply