[Q48-Q65] Updated H35-460 Dumps PDF – H35-460 Real Valid Brain Dumps With 221 Questions!

NO.48 In the DC scheme between stations, the X2 interface can be used to realize the interworking between LTE and NR stations, but how long does the transmission delay take?

NO.49 When using multimode fiber to connect BBU and AAU, the distance should not exceed how many meters?

NO.50 The 5G RAN2.0 version gNodeB supports the default routing domain with a VRF index of 0.

NO.51 gNodeB’s baseband device BascbandEQM is an optional addition.

NO.52 Which configuration modules that have different MML commands for gNodeB data configuration and LTE data configuration? (Multiple Choice)

NO.53 Where is the downlink data distribution in the NSA architecture implemented?

NO.54 Which entity is used in the RLC layer for detection and error correction?

NO.55 Which of the following 5C network evolution paths has the lowest deployment cost?

NO.56 In the GL to GL+NR (BBU39XO+BBU5900) evolution path, which of the following devices does not need to be added?

NO.57 What are the negotiation parameters that the NodeB needs to obtain when adding a remote maintenance channel? (Multiple choice)

NO.58 CPRI fiber is recommended to use multimode fiber when the BBU and RRU are connected more than 150 meters.

NO.59 gNodeB configures the “return primary path flag” parameter in the SCTP template to indicate whether the primary path can be switched back when the established SCIP primary path fails.

NO.60 In the NSA Networking Option3x series scenario, gNodeB must configure an X2 interface.

NO.61 NR is divided into competitive and non-competitive random access. What is the main purpose of UE triggering random access? (Multiple choice)

NO.62 The next board supports software reset?

NO.63 When a CPE device is upgraded in the near end, the firmware upgrade of the primary and standby areas can be completed at the same time as the “Update” upgrade operation.

NO.64 Which of the following RF units operates in the 1800Mhz band and meets the needs of uplink and downlink decoupling applications?

NO.65 When the port of the SC2 link of the X2 interface is negotiated, the local and the peer can share the same port number.