Get The Most Updated NS0-520 Dumps To NCIE-SAN Specialist Certification [Q133-Q150]

Rate this post

Get The Most Updated NS0-520 Dumps To NCIE-SAN Specialist Certification

Network Appliance Certified NS0-520 Dumps Questions Valid NS0-520 Materials

QUESTION 133
A customer’s NetApp infrastructure is reaching end-of-life (EOL), and they want to inventory their NetApp cluster. The customer wants to make sure that the proposed technical refresh satisfies their growing data demands.
Which two tools would you use to help with this recommendation? (Choose two.)

Upgrade Advisor

OneCollect

Config Advisor

Active IQ

QUESTION 134
An administrator added the FCP protocol to an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Which two statements describe how to solve this problem? (Choose two.)

Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.

Create a zone with a single initiator and the target LIF’s WWPN.

Perform takeover and giveback of both controllers.

Disable and enable the FC port with the attached host, causing a FLOGI.

QUESTION 135
You are configuring both NVMe and FC on the same AFF A700 2-node ONTAP 9.5 cluster. You are also configuring both protocols on the same FC fabric using the same A700 HBA ports.
In this scenario, which three configurations are supported? (Choose three.)

16 GB HBAs

8 GB HBAs

16 GB fabrics

32 GB HBAs

32 GB fabrics

QUESTION 136
A customer is deploying a SAN cluster of A700 nodes and wants to ensure that the SAN cluster will maintain a quorum in the event of a rack level power failure. Which two statements are true in this scenario? (choose two.)

Six nodes are required

Four nodes are required

Three racks are required

Two racks are required

The quorum rule states that to make changes to the configuration in our cluster, we need to have more than half of the nodes available. This prevents configuration conflicts if we lose connectivity between the nodes in our cluster.
So, if we have only 2 racks and 4 nodes we could never get more than half of the nodes available if one of those racks power fails.
We need 6 nodes separated on 3 racks, so we can have more than half of the nodes available if one of those racks power fails.

QUESTION 137
You have a 4-node AFF A400 cluster serving iSCSI and FC LUNs. You are asked to tier Snapshot copy data from the SSDs to both Azure Blob storage and Amazon S3. The two sets of Snapshot copies must be managed by ONTAP software so that they are accessible for cloning and replication.
In this scenario, which NetApp technology accomplishes this task?

Flash Pool

Fabric Pool

MetroCluster

Cloud Sync

QUESTION 138
Exhibit.

An administrator is configuring FCoE on Cisco Nexus switches for a new AFF A200 ONTAP cluster. The administrator executes the commands shown in the exhibit to create the necessary network configuration.
Which VLAN is responsible for controlling the FCoE traffic on the new interface?

3011

QUESTION 139
Which NetApp tool views automated, schedule configuration, and performance data for a customer’s SAN from a Web browser?

Virtual Storage Console

OnCommand Workflow Analyzer

Config Advisor

Active 1Q

QUESTION 140
At which storage object level is deduplication enabled?

Aggregate

Volume

Qtree

LUN

QUESTION 141
A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host.
Which configuration does the customer need to verify in their solution?

LUN mapping with igroup

host HBA speed settings

FC target port setting on NetApp node

FC switch zoning

QUESTION 142
Click the Exhibit button.

A customer is troubleshooting an AFF A700 2-node cluster that is running out of space. They need to add two additional shelves, one shelf to stack-1, and a shelf to stack-2.
Referring to the exhibit, how many cables are required?

QUESTION 143
Referring to the exhibit, what is the problem with switch port 0?

The transmit and receive links were switched.

The SFP+ is faulty.

The receive power is lower.

The link is not connected.

QUESTION 144
Click the Exhibit button.

An administrator is trying to configure a multiple-hop Cisco MDS switch and is receiving the error shown in the exhibit.
In this scenario, which action will solve this problem?

Configure the physical link of interface ext17 as an F_Port.

Configure the external interface to a different virtual SAN (VSAN) on both ends.

Connect the external link to a Cisco MDS switch.

Turn N_Port ID virtualization (NPIV) off.

QUESTION 145
You have an AFF A220 cluster connected to a dual fabric topology. You must ensure that SAN hosts do not lose access to LUNs during unplanned failures.
Which two operations should be performed to accomplish this task? (Choose two.)

Initiate a reboot of one Fibre Channel switch.

Turn the power off on one disk shelf.

Manually set all LUNs offline.

Manually set all FC LIFs on a single node to “down”.

QUESTION 146
Exhibit.

You are working on a project to install a new AFF A300 storage array. You use a pair of Nexus 3596 switches for FC connectivity between your VMware ESXi servers and the AFF A300.
Which SAN switch feature must be enabled to accomplish this task?

N_Port ID visualization (NP1V)

Open Shortest Path First (OSPF)

Link Aggregation Control Protocol (LACP)

N_Port Visualization (NPV)

QUESTION 147
You are planning to expand a SAN-only ONTAP 9.5 cluster that consists of eight AFF A700 nodes.
In this scenario, what is the maximum number of additional AFF A700 nodes that would be added?

QUESTION 148
An administrator has an ONTAP cluster with SVMs and LUNs as shown in the exhibit. Hosts attempting to connect to LUNs mapped from SVM “C” are unable to see their LUNs. The hosts are not configured to connect to any other SVM.
Which action should be performed to restore multi-path connectivity to the LUNs in this scenario?

Create LIFs on SVM “C” for host connectivity.

Move the LUN to a different volume within SVM “C”.

Move the LUN to SVM “E” to restore connectivity.

Move the LUN to SVM “A” to restore connectivity.

QUESTION 149
You have three Windows servers and one Linux server, each with dual-ported HBAs that are connected into a dual fabric.
In this scenario, what is the minimum number of zones that you need to create within each fabric switch?